Time Display - Toshiba XF350 Serie Manual De Instrucciones

stereo/bilingual transmissions, the timer
The Time Display
The time display facility allows the current (text service) time
to be seen on the television screen.
Press D whilst watching a normal television broadcast
to see a time display from the broadcaster. It will remain on
screen for about 5 seconds.
Stereo and Bilingual transmissions
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a few
seconds. If the broadcast is not in stereo the word Mono will
appear.
Stereo... Press s to select Stereo or Mono.
Bilingual... Bilingual transmissions are rare. If they are
transmitted the word Dual will display. Choose the
required programme number and if the word Dual
appears press s to select Dual 1, Dual 2 or Mono.

Time display,

The television can be set to turn itself On or Off after a
a
b
c
d
24
The Timer
certain time.
C c
Press MENU and or to select the TIMER
menu.
TIMER
Sleep timer
On timer
On timer Position
MENU Back EXIT Watch TV
b
Press to select On or Sleep timer. Use the
number buttons to set the required time. For
example, to switch the television off in one and a
half hours enter 01:30, or press
decrease in steps of 10 minutes.
If setting the Sleep timer, press EXIT to finish. If
setting the On timer, press
Position, enter the programme position number
1
required, then press to put the television into
Standby. The GREEN On timer indicator on the
front of the television will now be lit.
Any equipment connected with SCART leads must
also be put into Standby to prevent them from
being displayed when the timer switches on.
Once the On timer has been set the television can
be switched on at any time by pressing
The GREEN On timer indicator will remain on until
the set time period as passed when the television
will go to the chosen channel. This feature can help
to avoid missing favourite programmes.
To cancel the On timer/Sleep timer, enter zero in
each position.
01:30
00:00
01
c
to increase/
b
to select On timer
1
.