AEG VCR 4505 Manual De Instrucciones página 71

HG210ED(EN).fm Page 7 Tuesday, March 2, 2004 4:08 PM
To Select a Desired Channel
You can select a desired channel by using
directly pressing the
number buttons
• Enter a channel numbers as a two-digit number for the
quickest results. For example, to select channel 6, press
and . If you only press , channel 6 will be selected after a
6 6
brief delay.
• You can only select channels 1–99.
Manual Channel Preset
• Use the remote control for this procedure.
1) Press .
MENU
2) Press / or /
PLAY STOP
o L
/ .
F.FWD B
3) Press / or /
PLAY o STOP L
press / .
F.FWD B
4) Press / or /
PLAY o STOP L
press / .
F.FWD B
5) Press / or /
PLAY o STOP L
press / .
F.FWD B
•When a weak signal is received in Manual Tuning mode,
you can change the background to solid blue or the
static screen by pressing
6) Press the
,
number buttons
your desired position number, then press
•You can select position number 01-99.
•If [ON] appears on the right side of "SKIP", press
/ or / to point to "SKIP". Then, press
PLAY STOP
o L
/ to select [OFF].
F.FWD
B
•If you want to remove scrambled signals, press
or / repeatedly to point to "DECODER". Then,
STOP
L
press / to select [ON].
F.FWD
B
7) Press
/ or /
PLAY STOP
o L
press / .
F.FWD
B
Press / or /
PLAY STOP
o L
search up or down automatically. When a channel is
found, the VCR will stop searching and the picture will
appear on the TV Screen.
•You can select desired channel number by using
the . You must refer to the following
number buttons
Channel Plan table and press three digits to select the
channel number.
(To select channel 24, press "
press " " and " ".)
2 4
•If this is the channel you want, press
Channel Plan
CH Indication
02 – 12
13 – 20
21 – 69
74 – 78
80 – 99,100
121 – 141
This VCR can receive Hyper and Oscar frequency bands.
8) Press to exit.
MENU
( / ), or
CHANNEL
o p
on the remote control.
0
to select "INITIAL", then press
to select "CH TUNING", then
to select "MANUAL", then
to select "POSITION", then
.
TAPE COUNTER RESET
/ , or / to select
PLAY o STOP L
/ .
F.FWD B
/
PLAY
o
to select "CHANNEL", then
. The VCR tuner will begin to
" button first and then
0
.
/
F.FWD B
TV Channel
E2 – E12
A – H (only ITALY)
E21 – E69
X, Y, Z, Z+1, Z+2
S1 – S20,GAP
S21 – S41
To confirm that a channel has been added, press
Note:
( / ).
CHANNEL
o p
MENU
TIMER
SET UP
INITIAL
MANUAL
P08
POSITION
CHANNEL 008
[OFF]
DECODER
[OFF]
SKIP
To Skip a Preset Channel
The channels you can no longer receive or seldom watch can
be set to be skipped when you access channels by pressing
( / ).
CHANNEL
o p
• Use the remote control for this procedure.
1) Press .
MENU
2) Press / or /
PLAY o STOP L
/ .
F.FWD B
3) Press / or /
PLAY o STOP L
press / .
F.FWD B
4) Press
/ or /
PLAY o STOP L
press / .
F.FWD B
5) Press
/ or /
PLAY o STOP L
press / .
F.FWD B
6) Press the
,
number buttons
relevant position number, then press
7) Press
/ or /
PLAY STOP
o L
/ to select [ON].
F.FWD
B
•To memorize the channel again, press
will change to "OFF".
8) Press
to exit.
MENU
To confirm that a channel has been deleted, press
Note:
( / ).
CHANNEL
o p
MENU
TIMER
SET UP
INITIAL
MANUAL
POSITION P08
008
CHANNEL
[OFF]
DECODER
[ON]
SKIP
7
INITIAL
CH TUNING
CLOCK
RF OUT
LANGUAGE
CH TUNING
AUTO
MANUAL
MOVE
to select "INITIAL", then press
to select "CH TUNING", then
to select "MANUAL", then
to select "POSITION", then
/ , or / to select
PLAY o STOP L
/ .
F.FWD B
to select "SKIP", then press
/ . "ON"
F.FWD
B
INITIAL
CH TUNING
CLOCK
RF OUT
LANGUAGE
CH TUNING
AUTO
MANUAL
MOVE
EN