Changing Display Backlight Color; Important - Metra 99-3010S Manual Del Usuario

Changing display
backlight color
1. Press the front defrost button for 5 seconds,
this will engage the "Configure Backlight
Color" mode. (Figure A)
Note: Backlight will blink while in this mode.
2. Create your backlight color (Figure A):
• Press and hold the "Face" button to
increase Red.
• Press the "Foot" button to decrease Red.
Red Green
Color level up
Color level down
(Figure A)
METRA. The World's best kits.
Installation instructions for 99-3010S
• Press and hold the "Face/Foot" button to
increase Green.
• Press and hold the "Def/Foot" button to
decrease Green.
• Press and hold the "Fan Up" button to
increase Blue.
• Press and hold the "Fan Down" button to
decrease Blue.
3. After you have your desired color stop
pressing the button(s) and the blinking will
stop leaving your desired color. (Figure A)
Blue
Press and hold to enter
"Configure backlight color" mode
metraonline.com
™

IMPORTANT

If you are having difficulties with the
installation of this product, please call our
Tech Support line at 1-800-253-TECH.
Before doing so, look over the instructions a
second time, and make sure the installation
was performed exactly as the instructions
are stated. Please have the vehicle apart
and ready to perform troubleshooting steps
before calling.
K
NOWLEDGE IS
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
© COPYRIGHT 2004-2014 METRA ELECTRONICS CORPORATION
P
OWER