Mopar 82212789AB Instrucciones De Montaje página 5

25. Remove both front fascia filler panels (1).
26. From behind the fascia, position the fog lamp (1).
27. From outside the fascia, install the fog lamp retaining
screws (2).
28. Install the fog lamp on the other side
29. Install both of the fog lamp bezels.
NOTE: Do not remove the two plastic rivets (3) at the
rear of the wheelhouse splash shield (2).
30. Remove the twelve RF wheelhouse splash shield
push­in retainers (1).
31. Pull the front of the splash shield (2) down (without
fully removing) for access to the wiring harness
and wiring harness grommet at the back of the
wheelhouse.
Feb 11, 2011
www.mopar.com
5
K6861239