6
32. Pull the fog lamp harness (1) down into the wheel well
area and connect to the RH fog lamp (2).
33. Connect the kit BCM harness connector (3) to the to
the fog lamp harness connector.
34. Route the BCM/fog lamp harness (2) with the vehicle
harness (1) toward the back of the wheelhouse.
35. Disconnect the body wiring harness grommet (1) from
the body.
NOTE: Be careful not to damage the harness or ter
minals when piercing the grommet or feeding the har
ness through the grommet.
36. Pierce (3) the grommet (1) and feed the kit BCM wire
harness (2) through the grommet (1) from the outside.
Feb 11, 2011
www.mopar.com
K6861239