Video Mode - GoPro HERO4 Manual Del Usuario

CAPTURING VIDEO
To capture video, verify that the camera is in a Video mode. If one of
the Video icons does not appear in the upper le on your camera's
touch display, swipe le , then tap Video.
To Start Recording:
Press the Shutter/Select button [
and the camera status lights (red) flash while recording.
To Stop Recording:
Press the Shutter/Select button [
flash three times and the camera emits three beeps.
If the memory card is full or the battery is out of power, your camera
automatically stops recording. Your video is saved before the camera
powers off.
PRO TIP: When the camera is off and QuikCapture is enabled, you
can turn the camera on and immediately begin capturing video just
by pressing the Shutter/Select button [
recording and power off the camera. For details, see Setup Mode.

/ Video Mode

]. The camera emits one beep
]. The camera status lights (red)
]. Press again to stop
27