Brita PURITY 450 Quell ST Manual De Instrucciones página 33

Memory Call-Up
In the Memory Call-Up mode, the data of the last 4 fi lter cartridges used can be called up.
• Briefl y press button 1 x (<1 second) until the following message appears.
-1, -2, -3, -4 level – data of the cartridges used before the current one.
Carbonate hardness
Total meter reading when changing the fi lter
cartridge
At the top left, the indicator for the fi lter cartridge (-1 for previous fi lter cartridge) is displayed alter-
nately with the carbonate hardness set and the hardness unit. At the top right, the fi lter system size
is displayed alternately with the by-pass setting (display 1 s indicator, 1 s carbonate hardness), at the
bottom left, the meter reading when changing the cartridge (-1) and at the bottom right, the installa-
tion date of the cartridge.
Meaning: the fi lter cartridge most recently used was a PURITY 1200 cartridge, the fi lter cartridge
was inserted on 25/06/05 and operated up to a meter reading of 23166 litres.
The carbonate hardness set was 14°KH and the by-pass measured was 30%.
The same applies to the cartridge(-2), preceding fi lter cartridge and the other preceding fi lter car-
tridges -3, -4.
Error Messages
The error level E1 indicates whether and from when until when an error has occurred at the water
intake meter.
E1 is activated as soon as the current by-pass is greater than 60%.
The word Start is then displayed together with the date of occurrence.
Please check that the non-return valve is seated correctly.
As soon as the current by-pass setting is in the range between 0 and 60% again, the error has
ended and the Stop date is added. At error level 01 the Stop and Start display alternates every
second.
Error level E2 indicates whether and from when until when an error has occurred at the outlet water
meter. Display is similar to level E1.
By-pass
alternating
alternating
Cartridge indicator
Date of inserting the cartridge
Type
33