Cleaning And Care - Suntec Wellness Klimatronic CoolBreeze 3000 TVM Manual De Instrucciones

SPECIAL SECURITY ADVICE
- The protective frame must be closed properly during
operation.
- Do not place anything in the protective frame. Do not
cover the protective frame during operation.
NOTE
For ecological reasons, we use the non-visible area of the stand as a stand exclusively
heavy weight recycled material.
To safeguard the environmental idea, we do not also for environmental reasons, a
thorough cleaning of this weight because it is not visible during operation.
STRUCTURE
ASSEMBLY
Remove the wing screw from the motor pain.
-
Fit the rear cage onto the motor pain. Make sure that the 2 holes on the motor match
-
the 2 holes on the rear cage. Fit the wing screw and screw it on firmly.
- Put the blade on the motor pain and carefully tighten the screw.
Fit the front cage onto the rear cage and fix them together using the metal clips.
-
Tighten the small screw.
OPERATING INSTRUCTIONS
The fan has 3 speed settings:
0 = Device off
I = Low speed
II = Medium speed
III = High Speed
The fan can operate in oscillating or stationary mode. Press the oscillation button to
activate the oscillating mode.

CLEANING AND CARE

- Always switch the fan off and unplug it before cleaning.
1. Handle
2. Rear grille
3. Oscillation button
4. Speed controller
5. Front grille
6. Stand