Remote control
FUNCTIONS
1.
Take the unit from the package.
2.
Connect the unit to the power outlet (220-240V - 50/60Hz).
3.
Press the buttons on the control panel as follows:
●
POWER:
Press the button to turn the unit on or off.
●
SPEED:
Set the desirable fan speed (Hi, MED, LOW). The default speed is low.
●
MODE:
Press the button to choose Normal (NM), Natural (NT) or Sleep mode
(SL).
Press the button to activate the timer function (0,5h – 7,5h). The set
●
TIMER:
time will appear on LED Display. Continuously press the button for 3
seconds, the time will increase in hours.
●
OSC:
Press the button to activate or deactivate the oscillation of the fan.
4.
All functions can be enabled using the control panel or remote control.
CLEANING AND STORAGE
Before cleaning the unit turn the power off by pressing the POWER button, wait a few
minutes and then unplug the power cord from the outlet.
Clean the unit using a damp cloth, and then wipe it using a dry cloth.
Do not use chemical solvents (such as gasoline, alcohol). The surface and the entire
housing could be damaged.
Gently remove the cover, than remove the air filter.
Rinse the filter under running water and dry it with a soft cloth.
We recommend cleaning the unit once a month.
Oscilation
Choose Normal (NM), Natural (NT) or
Sleep mode (SL)
Timer, up to 7.5 hours (0.5 hour per
setting).
Continuously press the button for 3
seconds, the time will increase in hours.
Fan speed: HI, MED, LOW
On / Off
15