Publicidad

Enlaces rápidos

20'x8'
OUTDOOR STORAGE SHED
MODEL 60351
BEFORE ASSEMBLY:
• Assemble on a level platform.
• At least 3 people recommended for setup.
• Inspect all parts and hardware. Ensure all are
included using the Parts Identifier in the middle
of these instructions. The Parts Identifier , in
yellow, can be removed from the instructions for
quick reference.
ADDITIONAL ASSEMBLY HELP
ASSEMBLE IT WITH THE FREE BILT INTELLIGENT
INSTRUCTIONS APP
IN THE APP, SCAN OR SEARCH #1214164
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
TOOLS REQUIRED (NOT INCLUDED—UNLESS INDICATED OTHERWISE)
QUESTIONS?
Call: 1-800-225-3865
7:00 am–5:00 pm (Monday–Friday) MST
and 9:00 am–1:00 pm Saturday MST
WATCH THE INSTRUCTIONAL VIDEOS ON YOUTUBE
Scan the code, or visit go.lifetime.com/lifetime60351-fullassembly
CONTACT OUR CUSTOMER SERVICE:
Web: www.lifetime.com/customerservice
(Click on the "LIVE CHAT" tab)
For Customer Service in mainland Europe:
E-mail: cs@lifetimeproducts.eu
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 3. Para el español, ver la página 2.
5/16" (≈8 mm)
5/16" (≈8 mm) Wood Drill Bit
5/16" (≈8 mm) Masonry Drill Bit
MODEL# AND PRODUCT ID
Model Number: 60351
Product ID:
TABLE OF CONTENTS
Icon Legend...............................4
Warnings & Notices.....................5
Platform Construction.................6
Truss Assembly.........................11
Gable Assembly........................18
Door Assembly..........................26
Floor Assembly.........................41
Wall Assembly...........................45
Parts Identifi er..........................i-iv
Shelving Installation.................54
Roof Assembly..........................58
Window Installation...................79
Shutter Installation...................81
Accessory Installation................84
Snowload Kit Installation...........86
Door Alignment........................90
Shed Anchoring........................92
Cleaning & Care.........................95
Registration...........................96
Warranty..............................97
(both are needed when contacting us)

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Lifetime 60351

  • Página 1 ASSEMBLE IT WITH THE FREE BILT INTELLIGENT WATCH THE INSTRUCTIONAL VIDEOS ON YOUTUBE INSTRUCTIONS APP IN THE APP, SCAN OR SEARCH #1214164 Scan the code, or visit go.lifetime.com/lifetime60351-fullassembly IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY TOOLS REQUIRED (NOT INCLUDED—UNLESS INDICATED OTHERWISE) TABLE OF CONTENTS Icon Legend.......4...
  • Página 2: Instructions D'ASsemblage

    OBTENIR DE L’AIDE D’ASSEMBLAGE REGARDER LES VIDEOS ÉDUCATIFS SUR YOUTUBE L’ASSEMBLER AVEC LA APPLI GRATUITE BILT Scanner le code, ou chercher go.lifetime.com/ lifetime60351-fullassembly DANS L’APPLI, SCANNER OU CHERCHER #1214164 IMPORTANT, À CONSERVER POUR DE FUTURS BESOINS DE RÉFÉRENCE : À...
  • Página 3: Tabla De Contenido

    OBTENER AYUDA DE ENSAMBLE VER LOS VÎDEOS INSTRUCTIVOS EN YOUTUBE ENSAMBLARLO CON LA APP GRATIS BILT lifetime60351-fullassembly Escanear el código, o buscar go.lifetime.com/ EN LA APP, ESCANEAR O BUSCAR #1214164 IMPORTANTE: CONSERVE PARA FUTURA REFERENCIA. LEA CUIDADOSAMENTE INSTRUMENTAL REQUERIDO (NO INCLUIDO—SALVO INDICACIÓN EN CONTRARIO) ÍNDICE...
  • Página 4 ICON LEGEND / LÉGENDE DES ICÔNES / SIGNIFICADO DE LOS ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être portée à la lecture. • Indica que uno debe prestar atención al leer. •...
  • Página 5 WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS English: • Failure to follow these warnings may result in serious injury or property damage and will void warranty. • To ensure safety, do not attempt to assemble this product without following the instructions carefully. •...
  • Página 6 PLATFORM CONSTRUCTION / CONSTRUCTION DE LA PLATE-FORME / CONSTRUCCIÓN DE LA PLATAFORMA • You must provide a platform on which to assemble your shed. Proper building permit documentation may be required in your neighborhood. Consult all local building codes prior to assembling the shed. Before beginning assembly, you must pour or construct a platform.
  • Página 7 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) CONCRETE REQUIRED / BÉTON REQUIS CONCRETO REQUERIDO 2 yd (1,53 m CONCRETE PLATFORM / PLATE-FORME EN BÉTON PLATAFORMA DE CONCRETO • The concrete should be approximately 4" (10,2 cm) thick. The actual dimensions of the shed, at its widest and longest points, are 240"...
  • Página 8: Leyenda De Íconos

    SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS MADERA REQUERIDA WOOD PLATFORM / PLATE-FORME EN BOIS PLATAFORMA DE MADERA • All lumber must be rated for outdoor use! The actual dimensions of the shed, at its widest and longest points, are 240" x 96"...
  • Página 9: Advertencias Y Avisos

    SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS, PARTS, AND HARDWARE REQUIRED / OUTILS, PIÈCES, ET QUINCAILLERIE REQUIS INSTRUMENTAL, PIEZAS, Y HERRAJE REQUERIDOS 2 in/po x 4 in/po x 238 1/4 in/po (5,1 cm x 10,2 cm x 6,05 m) (x2) 2 in/po x 4 in/po x 90 1/2 in/po (5,1 cm x 10,2 cm x 2,30 m) (x16) 16d 3 1/2 in/po (16d x 8,89 cm) (x64) 1.2.1...
  • Página 10: Ensamblaje De La Plataforma

    SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS, PARTS, AND HARDWARE REQUIRED / OUTILS, PIÈCES, ET QUINCAILLERIE REQUIS INSTRUMENTAL, PIEZAS, Y HERRAJE REQUERIDOS 46 1/4 in/po x 93 1/2 in/po x 3/4 in/po 48 in/po x 93 1/2 in/po x 3/4 in/po (118 cm x 2,38 m x 19,1 mm) (x1) (1,22 m x 2,38 m x 19,1 mm) (x4) 8d 2 in/po (8d 5,08 cm) (x96)
  • Página 11 TRUSS ASSEMBLY / ASSEMBLAGE DES FERMES / ENSAMBLAJE DE LAS CERCHAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje CXK (x2) DTK (x30) ADY (x27) ADJ (14) ADK (x56) DTJ (x1) AHT (x1) 11 9/16 in/po (≈29,4 cm) ADH (x7)
  • Página 12 • En cas d’avoir des problèmes avec cette section, suivre le code en bas pour voir un vidéo sur l’assemblage dans cette section. • En caso de tener problemas con esta sección, seguir el código debajo para ver un video sobre el ensamble en esta section. http://go.lifetime.com/ 20’ x 8’ Outdoor Storage Shed Sec2 SIDE TRUSSES (x2) / FERMES LATÉRLES (x2)
  • Página 13 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADY (x8) ADK (x8) 7/16 in/po (x2) (≈11 mm) (x2) 11 9/16 in/po (≈29,4 cm) ADH (x2) ADJ (x4) ADY (x2)
  • Página 14 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADJ (x8) 7/16 in/po (x2) (≈11 mm) (x2) DTK (x16) 3/8 in/po (x2) (≈10 mm) (x2) ADY (x16) 11 9/16 in/po (≈29,4 cm) ADK (x32) ADH (x4)
  • Página 15: Ensamblaje De Las Cerchas

    SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) DTK (x4) ADK (x6) ADY (x2) CENTER TRUSS (x1) / FERME CENTRALE (x1) ARMAZÓN CENTRAL (x1) •...
  • Página 16 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (x2) (≈10 mm) (x2) DTK (x2) ADK (x1) DTJ (x1) CXK (x2) 2.11 • Attach the Vertical Truss Brace (DSN) to the Truss. Only fi nger tighten this Nut (ADK) for now. •...
  • Página 17 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (x2) (≈11 mm) (x2) ADJ (x2) 3/8 in/po (x2) AHT (x1) (≈10 mm) (x2) 11 9/16 in/po (≈29,4 cm) ADH (x1) ADK (x1) ADY (x1)
  • Página 18 GABLE ASSEMBLY / ASSEMBLAGE DES PIGNONS / ENSAMBLAJE DE LAS FACHADAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADW (x10) ADZ (x9) AEE (x16) ENH (x2) AIQ (x2) ADV (x16) EYR (x4) ADK (x4) EYQ (x3)
  • Página 19 • En caso de tener problemas con esta sección, seguir el código debajo para ver un video sobre el ensamble en esta section. http://go.lifetime.com/ 20’ x 8’ Outdoor Storage Shed Sec3 • Align the holes in the side gable halves (AGH and AGI).
  • Página 20 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x5) AEE (x5) AHS (x2) • Secure with the hardware provided. • Fixer les uns aux autres en utilisant la quincaillerie incluse. •...
  • Página 21 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x6) • Align the holes in the Tube with those in the Gable. • Alignez les trous dans le Tube avec ceux du Pignon. •...
  • Página 22: Ensamblaje De Las Fachadas

    SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 10 mm EYQ (x1) CXK (x1) ADZ (x3) AHS (x2) • Align the holes in the left (FTM) and right (FTN) rear gable halves. •...
  • Página 23 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 10 mm EYR (x2) ADV (x4) ADK (x2) AEE (x2) 3.11 • Align the holes in the header with those in the entry gable. •...
  • Página 24 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x5) ADZ (x2) AEE (x7) AHS (x2) CXK (x2) EYQ (x2) 3.14 3.15 • Secure with the hardware included. •...
  • Página 25 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADK (x2) ADV (x6) EYR (x2) AEE (x2) 3.18 • Align the holes in the header with those in the gable. •...
  • Página 26 LEFT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE GAUCHE / ENSAMBLE DE LA PUERTA IZQUIERDA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje BYZ (x4) AEE (x6) AAB (x4) ARA (x2) 1/8 in/po (3 mm) ADW (x2) ACH (x4) BYR (x2)
  • Página 27 Hole / Trou Agujero http://go.lifetime.com/ 20’ x 8’ Outdoor Storage Shed Sec4 • Align these holes • Aligner ces trous • Alinear estos agujeros • Insert an End Cap (BBH) into the Square Tube, and gently push the Tube into the hole until it’s fl ush with the bottom of the Left Door.
  • Página 28 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AAB (x2) ACH (x2) 1/8 in/po (3 mm) ARA (x1) EOY (x1) AEB (x2) • Secure the Left Latch Bracket (EOY) to the Door using the hardware included. Tighten only by hand at this point. •...
  • Página 29 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BYR (x1) ENP (x2) DGR (x1) Lower / Inférieur Inferior DGS (x1) ENO (x4) BYS (x1) Upper / Supérieur Superior •...
  • Página 30: Ensamblaje De Las Puertas

    SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AEE (x3) ADW (x1) BYZ (x2) • Secure the Handle to the Door using the hardware included. •...
  • Página 31 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS EPH (x1) • There is a narrow groove (illustrated in black) running along the outside of the window on the back of each Door. Starting at the top, left corner of the groove in the Left Door, lay the Butyl Tape (EPH) into the groove.
  • Página 32 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) 4.10 • Align the holes in the Pane with those in the Door, and gently set a Window Pane (DHN) down onto the Door. •...
  • Página 33 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BYR (x1) BYS (x1) ACH (x2) 7/16 in/po AEE (x3) (11 mm) AEB (x2) ADZ (x14) EPH (x1) AAB (x2) EOY (x1) ADW (x1)
  • Página 34 RIGHT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE DROITE / ENSAMBLE DE LA PUERTA DERECHA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje CXK (x4) BYR (x2) BYZ (x4) AAB (x4) BYS (x2) ADW (x2) BBI (x2)
  • Página 35 (BDK). • Align these holes in the next step http://go.lifetime.com/ 20’ x 8’ Outdoor Storage Shed Sec5 • Aligner ces trous dans l’étape suivante • Alinear estos agujeros en el paso siguiente •...
  • Página 36 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) 3/8 in/po BYS (x1) AEE (x2) (≈10 mm) BYR (x1) EOZ (x1) EPA (x1) EPC (x2) CXK (x2) AAB (x2)
  • Página 37 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AEE (x1) ADW (x1) BYZ (x2) BBI (x1) • Attach the Handle as indicated. Tighten securely. • Attacher bien la poignée comme indiqué. Serrer bien. •...
  • Página 38 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Slide a Hinge Tube (CRD) down through the hole in the top-right corner of the Door. •...
  • Página 39 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) EPH (x1) • There is a narrow groove (illustrated in black) running along the outside of the window on the back of each Door. Starting at the top, right corner of the groove in the Right Door, lay the Butyl Tape (EPH) into the groove.
  • Página 40 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AAB (x2) 7/16 in/po BYZ (x2) BYR (x1) (≈11 mm) ADW (x1) AEB (x2) BYS (x1) EPH (x1) CXK (x2) CHK (x1) ADZ (x14)
  • Página 41 FLOOR ASSEMBLY / ASSEMBLAGE DU PLANCHER / ENSAMBLAJE DEL PISO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje ADC (x2) BQC (x48) Note: These are not anchoring screws. Their purpose is to fasten together the Floor Panels. Nota: Estos no son Tornillos de anclaje.
  • Página 42 • En caso de tener problemas con esta sección, seguir el código debajo para ver un video sobre el ensamble en esta section. http://go.lifetime.com/ 20’ x 8’ Outdoor Storage Shed Sec6 • Hold an inner fl oor panel (CUD) at an angle and slide the tabs along the edge underneath an outer fl...
  • Página 43 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Repeat the last step. If the hole • Repeat step 6.2. is not at this corner, turn the panel •...
  • Página 44 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BQC (x42) • Insert the screws (BQC) through the divots in the fl oor panels and into the tabs of the adjacent fl oor panels. (The divots are near the seams of the fl...
  • Página 45: Ensamblaje Del Piso

    WALL ASSEMBLY / ASSEMBLAGE DES MURS / ENSAMBLAJE DE LOS MUROS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADZ (x153) ADV (x8) AHO (x4) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal Piezas de metal...
  • Página 46 • En caso de tener problemas con esta sección, seguir el código debajo para ver un video sobre el ensamble en esta section. http://go.lifetime.com/ 20’ x 8’ Outdoor Storage Shed Sec7 • Secure a wall support channel (AFM) just to the left of the notch on the eleven (11) wall panels •...
  • Página 47 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x12) • Secure a wall support channel (AFM) to the left narrow • Secure a wall support channel (AFM) to the corner wall panel (CKK) using four (4) screws (ADZ).
  • Página 48 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x8) • Secure a wall support channel (FLB) just to the left of the notch on each window wall panel (AHH) using four (4) screws (ADV) for each.
  • Página 49: Ensamblaje De Los Muros

    SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x5) • Insert the two tabs at the bottom of the narrow wall • Slide the panel to the left. panel (CKN) into the eleventh and twelfth slots from •...
  • Página 50 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x5) 7.11 • Insert the wall panel (AHD) in the next four • You may install the side doors on either end; however, you will need available slots, and slide the panel to the left.
  • Página 51 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 1 / CONTENU DE LA BOÎTE 1 CONTENIDO DE LA CAJA 1 BDJ (x1) AGQ (x6) BDK (x1) CUW (x2) CUD (x2) 45 1/2 in/po (1,16 m) CVA (x2) DQB (x4) CVE (x2)
  • Página 52 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS SMALL PARTS BOX 1 / CONTENU DE LA BOÎTE DE PETITES PIÈCES 1 CONTENIDO DE LA CAJA DE PIEZAS PEQUEÑAS 1 AFL (x6) AHE (x2) AYI (x4) DHN (x4) EDI (x2) AIX (x4) GKI EOW...
  • Página 53 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS METAL KIT 1 / CONTENU DU KIT DE PIÈCES EN MÉTAL 1 CONTENIDO DEL KIT DE PIEZAS DE METAL 1 34 1/8 in/po (≈86,7 cm) 50 9/16 in/po (≈1,28 m) DSO (x1) DSR (x7) 74 5/8 in/po (≈1,90 m)
  • Página 54 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 3 / CONTENU DE LA BOÎTE 3 CONTENIDO DE LA CAJA 3 FTN (x1) FTM (x1) CONTENTS METAL KIT 3 / CONTENU DU KIT DE PIÈCES EN MÉTAL 3 CONTENIDO DEL KIT DE PIEZAS DE METAL 3 19 3/4 in/po (≈50,2 cm) BRD (x7)
  • Página 55 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x20) 7.13 • Bend corner panel and pull down on the panel to snap the remaining tabs in place. To help with insertion, place the wood block (aiw) under the fl...
  • Página 56 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x55) 7.16 7.17 • Insert this corner wall panel (AGN) in the same way •...
  • Página 57 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHO (x4) 7.20 • Decide on which ends to install the doors (we placed the doors on the front and the left side; however, you may install them on the front and on the left or right side of the shed).
  • Página 58: Instalación De La Estantería

    SHELVING INSTALLATION / INSTALLATION DU RAYONNAGE / INSTALACIÓN DE LA ESTANTERÍA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje AIY (x2) ADZ (x14) ADZ (x8) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico...
  • Página 59 • En caso de tener problemas con esta sección, seguir el código debajo para ver un video sobre el ensamble en esta section. http://go.lifetime.com/ 20’ x 8’ Outdoor Storage Shed Sec8 • Insert the shelf brackets (AIY) into the slots in the wall support channels. The brackets must be at the same height and on the rear Wall.
  • Página 60 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Fold the fl aps on the ends of the shelf (AFV) up, and set the shelf onto the brackets.
  • Página 61 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Select any corner in which you would like to install a corner shelf (AFZ). Fold up the fl aps of the shelf, and align the holes in the tabs with those in the corner wall panel.
  • Página 62: Ensamblaje Del Tejado

    800-225-3865. ® • Si vive en un área donde la nieve puede convertirse de larga duración y extra pesada, Lifetime ofrece a precio de coste un kit suplementario para la carga de nieve que se puede instalar en su caseta para protegerla del peso adicional de la nieve en el tejado. Por favor, póngase en contacto con nuestro Departamento de servicios a clientes para obtener más información al 800-225-3865.
  • Página 63 ROOF ASSEMBLY / ASSEMBLAGE DU TOIT / ENSAMBLAJE DEL TEJADO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico AGQ (x14) BDR (x1) BDS (x1) DQB (x4) (x1) DRA (x1) (x1) CVA (x2) (x1) CVB (x2) DRB (x1)
  • Página 64 • En caso de tener problemas con esta sección, seguir el código debajo para ver un video sobre el ensamble en esta section. http://go.lifetime.com/20’ x 8’ Outdoor Storage Shed Sec 9 • Pull the hinge tube down out of the left door about six inches. Align the hole at the bottom of the hinge tube with the slit in the bushing, and insert the tube.
  • Página 65 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Secure the entry gable to the shed using six (6) screws (ADZ). • Fixer le pignon d’entrée à l’abri à l’aide de six (6) vis (ADZ). •...
  • Página 66 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Set a truss assembly into the notches on the fi rst two opposite wall panels. Set a roof panel (AGQ) onto the gable, wall panel, and truss assembly.
  • Página 67 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Align the four holes in the wall panel with those at the bottom of the roof panel, and insert four (4) screws (ADZ) to secure the panel in place.
  • Página 68 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) • Insert the roof support (AFL) into the notches in the gable and between the truss and the roof panel. Insert three (3) more screws (ADZ) to secure the panel in place.
  • Página 69 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x40) 9.12 • Attach the third and fourth roof panels (AGQ) similar to the way you attached the fi rst two. Secure with ten (10) screws (ADZ) each.
  • Página 70 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x76) 9.15 9.16 • Attach the panels to the right side of the shed • Attach a side gable to the shed using in the same way you did to the left.
  • Página 71 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) DTV (x2) AEE (x2) CXK (x2) AHP (x2) 9.18 • Secure the ends of the support tube to the underside of the trusses using the hardware included. •...
  • Página 72 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADZ (x1) 9.20 • Slide the holes in the entry gable down over the two hinge tubes. The ends of the gable go in the trusses. •...
  • Página 73 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x20) ECR (x1) ECS (x1) BZA (x2) ADK (x2) AEE (x4) 9.22 • Attach the two center, rear roof panels using only one roof sup- port per panel.
  • Página 74 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADZ (x14) 9.24 • Fold the ends of the large angled roof panel (DRA) and set it down onto the shed as shown. Secure the panel to the entry gable and center truss with twelve (12) screws (ADZ) at the locations shown.
  • Página 75 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x20) 9.26 • An adult must apply a downward pressure on panel (DRB) while another inserts these screws (ADZ). •...
  • Página 76 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 9.28 • Insert the two center roof extension panels (CVD) into the skylight connector (CVF) as shown. Repeat this step 4 times (for a total of fi...
  • Página 77 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) 9.30 • Secure the skylights to the extensions at the four points shown. • Attacher les lucarnes aux panneaux supplémentaires aux quatre points indiqués.
  • Página 78 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x12) 9.33 • Slide the two skylight assemblies from step 9.32 To the connector and extensions from step 9.29. •...
  • Página 79 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x12) 9.36 No screw in these holes yet / Aucune vis déjà dans ces trous / •...
  • Página 80 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x56) 9.39 • Secure the long roof extensions to the skylight No screw in these holes yet / Aucune vis déjà...
  • Página 81 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS CUZ (x4) ADZ (x24) 9.41 • Connect the roof panel extensions to the roof panels and gables at the locations shown. •...
  • Página 82 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x4) AIC (x1) AIM (x1) 9.43 • Attach the left (AIC) and right (AIM) gap fl aps to the corners of the doors (the doors from steps 9.1 – 9.2) Using the hardware included.
  • Página 83: Instalación De Las Hojas De Ventana

    WINDOW PANE INSTALLATION / INSTALLATION DES CARREAUX / INSTALACIÓN DE LAS HOJAS DE VENTANA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje ADY (x2) ADZ (x8) AIS (x4) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico...
  • Página 84 • Retirar la pelicula protectora de las dos caras de la hoja de ventana (AHE). Con el borde curvado hacia arriba y el interior, deslizar la hoja en su lugar. http://go.lifetime.com/20’ x 8’ Outdoor Storage Shed Sec10 10.2 10.3 • Insert a Screw (ADY) into the hole at the bottom of •...
  • Página 85: Instalación De Las Contraventanas

    SHUTTER INSTALLATION / INSTALLATION DES VOLETS / INSTALACIÓN DE LAS CONTRAVENTANAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje ARV (x16) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico AYI (x4)
  • Página 86 • En cas d’avoir des problèmes avec cette section, suivre le code en bas pour voir un vidéo sur l’assemblage dans cette section. • En caso de tener problemas con esta sección, seguir el código debajo para ver un video sobre el ensamble en esta section. http://go.lifetime.com/20’ x 8’ Outdoor Storage Shed Sec11 11.1 •...
  • Página 87 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) SECCIÓN 11 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ARV (x7) 11.2 • Align the screw bosses in the Shutters (AYI) with the Screws (ARV) as you insert the Screws. Secure both Shutters to the Panels.
  • Página 88: Instalación De Los Accesorios

    ACCESSORY INSTALLATION / INSTALLATION DES ACCESSOIRES / INSTALACIÓN DES ACCESORIOS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje ADZ (x14) EDL (x18) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Large Part / Grande pièce Pieza grande EDI (x2)
  • Página 89 8’ Outdoor Storage Shed Sec 12 12.2 • Insert the eighteen (18) Wall Hooks (EDL) into any of the notches in the Wall Panels (either side of the shed). Then push downward to lock them in place.
  • Página 90 SNOWLOAD KIT INSTALLATION / INSTALLATION DU KIT LA CHARGE DE NEIGE / INSTALACIÓN DEL KIT DE LA CARGA DE NIEVE HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje BRK (x200) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal Piezas de metal...
  • Página 91 • En caso de algun problema con esta sección, seguir el código debajo para ver un video sobre el ensamble en esta sección. 13.1 http://go.lifetime.com/20’ x 8’ Outdoor Storage Shed Sec 13 • Set a Gusset (BQW) up against a Truss as shown. Using an electric Drill, insert four Screws (BRK). Repeat this step for both sides and both ends of all Trusses except for the Center Truss.
  • Página 92 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) SECCIÓN 13 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x28) 7/16 in/po (x2) 11 mm (x2) 13.2 • Secure the Short Truss Brace to the Truss Assembly using four (4) Self-Drilling/Self-Tapping Screws (BRK). Tighten the Cap Nuts.
  • Página 93 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) SECCIÓN 13 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x8) 13.3 • Place the Left Gable Support (EGR) up fl ush against the Gable and Roof as shown. Secure with two (2) Self-Tapping Screws (BRK) to the Center Truss.
  • Página 94: Instalación Del Kit De La Carga De Nieve.86 Alineación De La Puertas

    DOOR ALIGNMENT / ALIGNEMENT DES PORTES / ALINEACIÓN DE LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico AIX (x4) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO...
  • Página 95 8’ Outdoor Storage Shed Sec14 14.2 • If the right door scrapes the fl oor or is lower than the left door, insert a shim (AIX) under the fl oor directly under the bottom corner of the right door.
  • Página 96: Anclaje De La Caseta

    SHED ANCHORING / ANCLAJE DE LA CASETA / ANCRAGE DE L’ABRI HARDWARE REQUIRED / HERRAJE REQUERIDO / QUINCAILLERIE REQUISE PARTS REQUIRED / PIEZAS REQUERIDAS / PIÈCES REQUISES TOOLS REQUIRED / INSTRUMENTAL REQUERIDO / OUTILS REQUIS 5/16” (≈8 mm) Wood Drill Bit 5/16”...
  • Página 97 SECTION 15 (CONTINUED) / SECCIÓN 15 (CONTINUACIÓN) SECTION 15 (SUITE) FOR CONCRETE PLATFORMS / PARA PLATAFORMAS DE CONCRETO POUR LES PLATE-FORMES EN BÉTON 5/16” (≈8 mm) 15.1 • To anchor your shed, you must purchase the correct anchoring hardware. For a concrete platform, we recommend using a hammer drill, 5/16”...
  • Página 98 SECTION 15 (CONTINUED) / SECCIÓN 15 (CONTINUACIÓN) SECTION 15 (SUITE) FOR WOOD PLATFORMS / PARA PLATAFORMAS DE MADERA POUR LES PLATE-FORMES EN BOIS 5/16” (≈8 mm) 15.1 • To anchor your shed, you must purchase the correct anchoring hardware. For a wood-framed platform, we recommend using a drill, 5/16”...
  • Página 99: Cleaning & Care

    Congratulations on your Lifetime ® product purchase. By following the instructions below, your new Lifetime product should provide you with years of service and enjoyment. The polyethylene panels are stain and solvent resistant. Most stains can be removed using a mild soap and a soft-bristled brush.
  • Página 100: Registro

    à des tiers, et ne leur permettra pas d’utiliser vos données personnelles à leurs propres fi ns. Nous vous invitons à lire notre politique de confi dentialité à www.lifetime.com (en anglais seulement) ENREGISTRER CE PRODUIT aujourd’hui! REGISTRAR EL PRODUCTO EN LÍNEA EN WWW.LIFETIME.COM...
  • Página 101 All merchandise is sold on this condition, and no representative of the company may waive or change this policy. 5. This product is not intended for institutional or commercial use; Lifetime Products, Inc. does not assume any liability for such use. Institutional or commercial use will void the warranty.
  • Página 102 2. Cette garantie n’est pas transférable et est expressément limitée à la réparation ou au remplacement du produit défectueux. Si le produit est déclaré défectueux selon les termes de cette garantie, Lifetime © Products, Inc. réparera ou remplacera les parties défectueuses gratuitement pour l’acheteur.
  • Página 103: Garantía

    NO ESTÁN DISPONIBLES O SON OBSOLETAS. 1. El comprador original recibe la garantía de que las casetas Lifetime estarán libres de defectos de material o de mano de obra por un período de 10 años a contar desde la fecha de la compra original. La palabra “defectos” se defi ne como imperfecciones que perjudican el uso del producto.
  • Página 104 ® AMÉLIORER VOTRE ACHAT LIFETIME EN AJOUTANT DES ACCESSOIRES OU DES AUTRES PRODUITS ® Pour acheter des accessoires ou d’autres produits Lifetime , nous rendre visite à : www.lifetime.com Ou composer le 1-800-424-3865 Du lundi au vendredi 7 h – 17 h (HNR) et samedi 9 h – 13 h (HNR) ®...

Tabla de contenido