Black and Decker BDMOW1400 Manual De Instrucciones página 10

ENGLISH
Vibration is generally a warning of
trouble, see the troubleshooting guide
for advise in the case of abnormal
vibration.
Always wear proper eye and
u
respiratory protection when operating
the lawn mower.
The use of any accessory or
u
attachment not recommended for
use with this lawn mower could be
hazardous. Only use accessories
approved by BLACK+DECKER.
Never overreach while operating the
u
lawn mower. Always be sure to keep
proper footing and balance at all times
while operating the lawn mower.
Mow across the face of slopes, never
u
up and down. Exercise extreme
caution when changing direction on
slopes.
Watch for holes, ruts, bumps, rocks or
u
other hidden objects. Uneven terrain
could cause a slip and fall accident.
Tall grass can hide obstacles.
Do not mow on wet grass or
u
excessively steep slopes. Poor footing
could cause a slip and fall accident.
Do not mow near drop-offs, ditches, or
u
embankments.
You could lose your footing or balance.
Always allow the mower to cool down
u
before storing.
Switch off, remove the plug from the
socket and ensure that moving parts
have stopped rotating before leaving
the appliance unattended and before
changing, cleaning or inspecting any
10
(Original instructions)
parts of the appliance or clearing a
blockage. After striking a foreign object.
Inspect the machine for damage and
make repairs before restarting and
operating the machine.
Vibration
The declared vibration emission values
stated in the technical data and the
declaration of conformity have been
measured in accordance with a standard
test method provided by EN50636 and
may be used for comparing one tool with
another. The declared vibration emission
value may also be used in a preliminary
assessment of exposure.
Warning! The vibration emission value
during actual use of the power tool can
differ from the declared value depending
on the ways in which the tool is used.
The vibration level may increase above
the level stated.
When assessing vibration exposure to
determine safety measures required by
2002/44/EC to protect persons regularly
using power tools in employment, an
estimation of vibration exposure should
consider, the actual conditions of use and
the way the tool is used, including taking
account of all parts of the operating
cycle such as the times when the tool is
switched off and when it is running idle in
addition to the trigger time.
Do not operate the tool if the vibration
registers as abnormal.