Description - Hilti SF 18-A Manual De Instrucciones

b) Do not expose batteries to high temperatures and keep them away
from fire. This presents a risk of explosion.
c) Do not disassemble, squash or incinerate batteries and do not
subject them to temperatures over 80°C. This presents a risk of fire,
explosion or injury through contact with caustic substances.
d) Avoid ingress of moisture. Ingress of moisture may cause a short
en
circuit, resulting in burning injuries or fire.
e) Observe the special guidelines applicable to the transport, storage
and use of Li-ion batteries.
f) Avoid short circuiting the battery terminals. Before inserting the
battery in the tool, make sure that the battery terminals and the
terminals in the tool are free from foreign objects. Short circuiting the
battery terminals presents a risk of fire, explosion and chemical burns.
g) Do not charge or continue to use damaged batteries (e.g. batteries
with cracks, broken parts, bent or pushed-in and/or pulled-out
contacts).
h) If the battery is too hot to touch it may be defective. Place the tool in
a location where it can be kept under observation, well away from
flammable materials, and allow it to cool down. Contact Hilti Service
after the battery has cooled down.
2.3.4 Electrical safety
Before beginning work, check the working area (e.g. using a metal
detector) to ensure that no concealed electric cables or gas and water
pipes are present. External metal parts of the power tool may become live,
for example, when an electric cable is damaged accidentally. This presents
a serious risk of electric shock.

3 Description

3.1 Use of the product as directed
The SFH 18-A is a hand-held, cordless hammer drill/driver for driving and
removing screws, for drilling in steel, wood and plastic and for hammer
drilling in lightweight concrete and masonry.
Do not use the battery as a power source for other unspecified appliances.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
The power tool is designed for professional use and may be operated,
serviced and maintained only by trained, authorized personnel.
personnel must be informed of any special hazards that may be encountered.
The power tool and its ancillary equipment may present hazards when used
incorrectly by untrained personnel or when used not as directed.
8
Printed: 22.06.2015 | Doc-Nr: PUB / 5226599 / 000 / 01
This