Care And Maintenance - Hilti SF 18-A Manual De Instrucciones

6.9 Belt hook
CAUTION
Check that the belt hook is fitted securely before beginning work.
The belt hook allows the power tool to be attached to a belt worn by the
operator. The belt hook can also be fitted to the other side of the power tool
en
for use by left-handed persons.

7 Care and maintenance

WARNING
Repairs to the electrical section of the power tool may be carried out
only by trained electrical specialists.
7.1 Care of the power tool
CAUTION
Keep the power tool, especially its grip surfaces, clean and free from
oil and grease. Do not use cleaning agents which contain silicone.
Never operate the power tool when the ventilation slots are blocked. Clean
the ventilation slots carefully using a dry brush. Do not permit foreign
objects to enter the interior of the power tool. Clean the outside of the
power tool at regular intervals with a slightly damp cloth. Do not use a spray,
steam pressure cleaning equipment or running water for cleaning. This may
negatively affect the electrical safety of the power tool.
7.2 Care of the Li­ion battery
NOTE
Battery performance drops at low temperatures.
NOTE
Store the battery in a cool and dry place.
In order to achieve maximum battery life, stop using the battery as soon as
a significant drop in battery performance is noticed.
NOTE
– If use continues, further battery discharge will be stopped automatically
before the battery cells suffer damage.
– Charge the batteries using the specified and approved Hilti battery
chargers for Li­ion batteries.
14
Printed: 22.06.2015 | Doc-Nr: PUB / 5226599 / 000 / 01
7