Before Use; Transport And Storage Of Batteries - Hilti SF 18-A Manual De Instrucciones

B 18/3.3
Battery
Li­Ion
Weight 0.78 kg
(1.72 lb)
No. of 12
cells

5 Before use

5.1 Charging a previously used battery
Ensure that the outer surfaces of the battery are clean and dry before
inserting the battery in the corresponding charger.
Read the operating instructions for the charger for further information about
the charging procedure.
5.2 Inserting the battery
CAUTION
Before fitting the battery, check that the power tool is switched off and
that the safety lock is engaged (forward/reverse switch in the middle
position). Use only the Hilti batteries approved for use with this power
tool.
1. CAUTION A falling battery may present a risk of injury to yourself
and others.
Check that the battery is securely seated in the tool.
5.3 Removing the battery
5.4 Fitting and adjusting the side handle
DANGER
Check that the clamping band is engaged in the groove provided on
the power tool and that the side handle is tightened securely.

5.5 Transport and storage of batteries

Pull the battery out of the locked position (working position) and move it into
the first latching position (transport position).
Observe national and international transport regulations when shipping
batteries (transportation by road, rail, sea or air).
Printed: 22.06.2015 | Doc-Nr: PUB / 5226599 / 000 / 01
B 18/2.6 B 18/2.6
Li­Ion Li­Ion
(01) (02)
0.78 kg 0.48 kg
(1.72 lb) (1.06 lb)
12 6
2
3
B 18/5.2
Li­Ion
0.78 kg
(1.72 lb)
12
4
B 18/1.6
Li­Ion
0.48 kg
(1.06 lb)
6
en
11