Briggs & Stratton 090000 Manual Del Operario página 12

Note: Some models have a fuel tank for vertical storage that will let the engine tilt for
maintenance or storage (C, Figure 20). Do not keep in vertical position with the fuel tank
filled above the bottom of the fuel level indicator (D), if equipped. For more instructions,
refer to the equipment manual.
Keep the engine level (normal operating position). Fill the fuel tank (A, Figure 21) with
fuel. For fuel expansion, do fill above the fuel tank neck (B).
Fuel can become stale when kept in a storage container for more than 30 days. Each
time you fill the container with fuel, add fuel stabilizer to the fuel as specified by the
manufacturer's instructions. This keeps fuel fresh and decreases fuel-related problems
or contamination in the fuel system.
It is not necessary to drain fuel from the engine when fuel stabilizer is added as
instructed. Before storage, turn the engine ON for 2 minutes to move the fuel and
stabilizer through the fuel system.
Engine Oil
While the engine is still warm, change the engine oil. See the Change Oil section.
For models labeled Just Check & Add™ and No Oil Changes, an oil change is not
required.
Battery Pack and Charger
See Figure: 22 23
Portable battery pack: When not in use, disconnect charger and store in a cool, dry
area. Wet, damp areas can cause corrosion of terminals and electrical contacts. If stored
for long periods in high temperatures (120° F / 49° C), permanent damage to the battery
pack can result. Check electrical terminals and contacts on battery packs and charger.
Wipe with clean cloth or blow clean with compressed air.
After storage, a normal charge may be required. To check available charge, press the
Battery Fuel Gauge button (E, Figure 22 23) and charge if required. See the Battery
Fuel Gauge section.
Troubleshooting
For assistance, contact your local dealer or go to BRIGGSandSTRATTON.com or call
1-800-233-3723 (in USA).
Specifications
Model: 090000
Displacement
Bore
Stroke
Oil Capacity
Spark Plug Gap
Spark Plug Torque
Armature Air Gap
Intake Valve Clearance
Exhaust Valve Clearance
Model: 093J00
Displacement
Bore
Stroke
Oil Capacity
Spark Plug Gap
Spark Plug Torque
Armature Air Gap
Intake Valve Clearance
Exhaust Valve Clearance
Model: 100000
Displacement
Bore
Stroke
Oil Capacity
Spark Plug Gap
12
8.64 ci (140 cc)
2.495 in (63,4 mm)
1.75 in (44,45 mm)
15 oz (,44 L)
.020 in (,51 mm)
180 lb-in (20 Nm)
.006 - .014 in (,15 - ,36 mm)
.004 - .008 in (,10 - ,20 mm)
.004 - .008 in (,10 - ,20 mm)
9.15 ci (150 cc)
2.583 in (65,60 mm)
1.75 in (44,45 mm)
15 oz (,44 L)
.020 in (,51 mm)
180 lb-in (20 Nm)
.006 - .014 in (,15 - ,36 mm)
.004 - .008 in (,10 - ,20 mm)
.004 - .008 in (,10 - ,20 mm)
9.93 ci (163 cc)
2.668 in (68,28 mm)
1.75 in (44,45 mm)
15 oz (,44 L)
.030 in (,76 mm)
Model: 100000
Spark Plug Torque
Armature Air Gap
Intake Valve Clearance
Exhaust Valve Clearance
Lithium-Ion Battery (Portable)
Lithium-Ion Battery Pack
Charge Minutes
Charging Current
Charger AC Input (Variable)
Operating Temperature
Lithium-Ion Battery (Integrated)
Lithium-Ion Battery Pack
Charge Minutes
Charging Current
Charger AC Input (Variable)
Operating Temperature
Engine power will decrease 3.5% for each 1,000 feet (300 meters) above sea level and
1% for each 10° F (5.6° C) above 77° F (25° C). The engine will operate satisfactorily
at an angle up to 15°. Refer to the equipment operator's manual for safe allowable
operating limits on slopes.
Service Parts - Models: 090000, 093J00, 100000
Service Part
Air Filter (see Figure 19)
Air Filter, Pre-cleaner (see Figure 19)
Oil - SAE 30
Resistor Spark Plug (Model 090000, 093J00)
Resistor Spark Plug (Model 100000)
Spark Plug Wrench
Spark Tester
Portable Lithium-Ion Battery Pack (US / Canada)
Portable Lithium-Ion Battery Pack (EU / UK / AU)
Portable Lithium-Ion Battery Charger (US / Canada)
Portable Lithium-Ion Battery Charger (EU)
Portable Lithium-Ion Battery Charger (UK)
Portable Lithium-Ion Battery Charger (AU)
Integrated Lithium-Ion Battery Pack
Integrated Lithium-Ion Battery Charger (US / Canada)
Integrated Lithium-Ion Battery Charger (UK)
Integrated Lithium-Ion Battery Charger (EU)
Integrated Lithium-Ion Battery Charger (AU)
We recommend that you see any Briggs & Stratton Authorized Dealer for all
maintenance and service of the engine and engine parts.
Power Ratings: The gross power rating for individual gasoline engine models is
labeled in accordance with SAE (Society of Automotive Engineers) code J1940 Small
Engine Power & Torque Rating Procedure, and is rated in accordance with SAE J1995.
Torque values are derived at 2600 RPM for those engines with "rpm" called out on the
label and 3060 RPM for all others; horsepower values are derived at 3600 RPM. The
gross power curves can be viewed at www.BRIGGSandSTRATTON.COM. Net power
values are taken with exhaust and air cleaner installed whereas gross power values
are collected without these attachments. Actual gross engine power will be higher than
net engine power and is affected by, among other things, ambient operating conditions
and engine-to-engine variability. Given the wide array of products on which engines
are placed, the gasoline engine may not develop the rated gross power when used in a
given piece of power equipment. This difference is due to a variety of factors including,
but not limited to, the variety of engine components (air cleaner, exhaust, charging,
cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions
(temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing
180 lb-in (20 Nm)
.006 - .014 in (,15 - ,36 mm)
.004 - .008 in (,10 - ,20 mm)
.004 - .008 in (,10 - ,20 mm)
10.8 V (10,8 V)
60
2 AMP (2 AMP)
100 - 240 V
32 - 113° F (0 - 45° C)
10.8 V (10,8 V)
240
.5 AMP (.5 AMP)
100 - 240 V
32 - 104° F (0 - 44° C)
Part Number
593260
594055
100005
692051
594056
19576
19368
593559
593560
593561
593562
593576
594501
84002154
84002790
84002791
84002792
84002793
BRIGGSandSTRATTON.com