DeWalt DC212 Traducido De Las Instrucciones Originales página 40

EN GLI SH
Package Contents
The package contains:
1 Cordless rotary hammerdrill
1 Side handle
1 Depth adjustment rod
1 Charger (K-models only)
2 Battery packs (K-models only)
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. A)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
INTENDED USE
Your cordless rotary hammerdrill DC212 has been
designed for professional drilling, hammerdrilling
and screwdriving applications.
Your cordless rotary hammerdrill DC213 has been
designed for professional drilling, hammerdrilling
and screwdriving applications as well as for light
chipping.
DO NOT use under humid conditions or in presence
of flammable liquids or gases.
These hammerdrills are professional power tools.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators
use this tool.
1 Variable speed switch
2 Forward/reverse slider
3 Mode selector
4 Safety lock
5 Tool holder
6 Locking collar
7 Dust cover
8 Depth adjustment rod
9 Side handle
10 Battery pack
11 Release buttons
12 Charger
13 Charging indicator (red)
38
Overload Clutch
In case of jamming of a drill bit, the drive to the
drill spindle is interrupted. Because of the resulting
forces, always hold the tool with both hands and
take a fi rm stance.
Brake Mechanism
When the variable speed switch is released, the
spindle will stop rotating instantly.
Active Vibration Control
The active vibration control neutralises rebound
vibration from the hammer mechanism. Lowering
hand and arm vibration, it allows more comfortable
use for longer periods of time and extends the life
of the unit.
In operation, a spring loaded mechanism
counterbalances the vibration forces. This can be
sensed by the cushioning effect when pressure
is applied to the tool. Make sure the spring is
engaged but not too fi rmly. The mechanism should
be allowed to 'fl oat'.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the battery pack
voltage corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your D WALT charger is double insulated
E
in accordance with EN 60335; therefore
no earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organization.
E
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be
made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs. Recommended fuse: 3 A.
Using an Extension Cable
An extension cord should not be used unless
absolutely necessary. Use an approved extension