Installing Windows - ASROCK A75 Pro4 Manual De Instrucciones

2.13 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.

2.14 Installing Windows

XP 64-bit With RAID Functions
If you want to install Windows
bit on your SATA3 HDDs with RAID functions, please refer to the document at the
following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.15 Installing Windows
XP 64-bit Without RAID Functions
If you want to install Windows
OS on your SATA3 HDDs without RAID functions, please follow below procedures
according to the OS you install.
2.15.1 Installing Windows
If you want to install Windows
functions, please follow below steps.
Using SATA3 HDDs without NCQ and Hot Plug functions (IDE mode)
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
Confi guration.
B. Set the "SATA Mode" option to [IDE].
®
STEP 2: Install Windows
ASRock A75 Pro4 Motherboard
®
7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista / Vista
®
7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista / Vista
®
XP / XP 64-bit Without RAID Functions
®
XP / XP 64-bit on your SATA3 HDDs without RAID
Advanced screen
XP / XP 64-bit OS on your system.
TM TM
/ Vista 64-bit / XP /
TM
64-bit / XP / XP 64-
TM TM
/ Vista 64-bit / XP /
TM
64-bit / XP / XP 64-bit
Storage
37