General Instructions - Lamborghini Caloreclima EL_DB E Manual Para La Installación Y El Mantenimiento

GENERAL INSTRUCTIONS

• Carefully read the instructions contained in this instruction booklet.
• After boiler installation, inform the user regarding its operation and give him this manual, which is an
integral and essential part of the product and must be kept with care for future reference.
• Installation and maintenance must be carried out by professionally qualified personnel, according to
current regulations and the manufacturer's instructions. Do not carry out any operation on the sealed
control parts.
• Incorrect installation or inadequate maintenance can result in damage or injury. The Manufacturer de-
clines any liability for damage due to errors in installation and use or failure to follow the instructions.
• Before carrying out any cleaning or maintenance operation, disconnect the unit from the power supply
using the system switch and/or the special cut-off devices.
• In case of a fault and/or poor operation, deactivate the unit and do not attempt to repair it or directly
intervene. Contact professionally qualified personnel. Repair/replacement of the products must only be
carried out by professionally qualified using original spare parts. Failure to comply with the above could
affect the safety of the unit.
• This unit must only be used for its intended purpose. Any other use is considered improper and the-
refore dangerous.
• The packing materials are potentially hazardous and must not be left within the reach of children.
• The images given in this manual are a simplified representation of the product. In this representation
there may be slight and insignificant differences with respect to the product supplied.
OPERATING INSTRUCTIONS
Introduction
Dear Customer,
Thank you for choosing a boiler featuring advanced design, cuttingedge technology, high reliability and
quality construction. Please read this manual carefully since it provides important information on safe
installation, use and maintenance.
is a high-efficiency heat generator for the production of heating hot water, suitable for operation with
blown oil or gas burners. The boiler shell consists of cast iron elements, assembled with steel stays
and double cones, whose profile is specially designed with optimum division of the fins, offering high
thermal efficiency and therefore high energysaving.
UK
12