Publicidad
Idiomas disponibles
Idiomas disponibles
Logitech® Air Speaker
Setup AirPlay using a computer
(optional)
1. Connect the AC power supply and turn
on the speaker. The speaker powers up in
35 seconds. Do not proceed with setup
until the speaker power up cycle finishes.
2. Press and hold the Wi-Fi Connect button
for more than 5 Seconds (the Status
indicator will blink green)
3. On your computer find Wi-Fi network
settings. Select the network called
"Logitech Air Speaker Setup".
(For Help refer to your computer
documentation.)
4. Launch an Internet browser.
Enter http://192.168.1.12 in the address bar.
A configuration page launches.
5. Follow the on-screen instructions.
Be ready to select your Wi-Fi network and
enter your password.
When the Status indicator turns green,
the Wi-Fi connection is made.
Continue to step 6.
Note: If the Status indicator changes
to blinking orange, the speaker was unable
to connect to your network. Please visit
www.logitech.com/support/airspeaker
for help and try again.
6. Reconnect your computer to
your Wi-Fi network.
6 6 English
Playing music
The speaker plays music from only one device
at a time. To switch from one wireless device
to another wireless device, stop the current
device before playing the new one. Playing
music from a docked device automatically
terminates play from a wireless device. Using
the Air Speaker's Auxiliary input terminates
play from either a wireless or docked device.
To resume play from a wireless or docked
device, disconnect the audio cable from the
Auxiliary input.
AirPlay with iOS device (wireless)
1. Make sure Wi-Fi is turned on for your iOS
device and your iOS device is connected to
the same network as the Air Speaker
2. Tap the iPod app or a music app.
3. Find the AirPlay icon
4. Choose the Air Speaker from the list
of speakers.
5. Select a song or track to play it.
1 You can also dock your iOS device directly
to the speaker to play music.
1
and tap it.
Publicidad
