Orbea ORCA AERO OMX 2022 Manual Tecnico página 19

36 | ORBEA
STE M
ICR01 R2 COMPLETE STEMS
WITH R2 FACEPLATE FOR THE OC R2 COMPUTER MOUNT
4
GREASE
6 N.m
4
6 N.m
Always follow the recommended
torque settings.
27 ICR01 R2 ROAD STEM
ART Nº: XA08
M5x15 (x6) bolts Top angle cover and
topcap not included.
100mm, 110mm, 120mm, 130mm (70mm
stem does not use the bottom cover)
TECHNICAL MANUAL
4
6 N.m
2
2 N.m
QTY.
1
BLUE PAPER ORCA AERO · OMX 2022
STANDARD STEMS ADAPTER
FOR ICR HEADSETS
The OC HS01 standard stem adapter allows for the instal-
lation of non-OC external cabling stems compatible with
standard round headset spacers on Orbea frames with ICR
headsets.
27
The HS01 adapter is only compatible with
ICR headset assemblies that use oval ICR
headset spacers (X063). Orca Aero OMX
2022 is compatible with the use of the HS01
adapter.
GREASE
The HS01 adapter´s cable grommets allow for its use with
· 2-hole gommets: For mechanical drivetrain assemblies
(2 brake hoses+2 gear outer cables) and electronic driv-
etrain assemblies with wired shifters.
· 1-hole grommets: For wireless Sram Etap and Shimano
12S Di2 (2 brake hoses).
· It is possible to combine the grommets for 1X drive-
train assemblies.
ORBEA | 37
E N
When installing the HS01 adapter, the neces-
sary headset spacers and the standard stem,
the assembly height may differ from the pre-
vious height with an OC ICR stem.
Check that the distance between the headset
cover and the bottom of the stem does not
the bicycle´s technical manual.
Check that the length of the fork´s steerer
tube allows for a secure installation of the
stem and that the cables are long enough.
Never install headset spacers above the
stem. The length of the fork´s steerer tube
must be appropiate so no spacers are need-
ed above the stem.
The stem must be installed onto the fork´s
steerer tube so both stem bolts are over an
area of the steerer tube. Never install the
stem in a position where the top stem bolt is
positioned above the upper limit of the fork´s
steerer tube.