52 | ORBEA
POWERMETERS
4IIII PRECISION POWERMETER
Orbea offers as standard in some models and as an op-
tion on others the left crankarm 4iiii Innovations PRE-
CISION powermeter with ANT+ Power and Bluetooth
BLE/4.0 connectivity.
Use the links below to access the manufacturer´s docu-
mentation on its use, calibration, FAQ, etc.
4iiii website:
https://4iiii.com/
For technical questions, contact 4iiii:
https://4iiii.zendesk.com/hc/en-us/requests/new
CONTENTS
Powermeters quickguide:
https://www2020.4iiii.com/data/quickstart-precision-qs.pdf
User manual:
https://www2020.4iiii.com/data/manual-precision-pro.pdf
4iiii app-iOS
https://apps.apple.com/ca/app/4iiii/
4iiii app-Android:
https://play.google.com/store/apps/details?id=com.fouriiii.
Frequently asked questions:
https://4iiii.zendesk.com/hc/en-us
PRECISION maintenance tutorial (video):
https://vimeo.com/202079432
PRECISION calibration (video):
https://vimeo.com/132149544
Battery replacement:
TECHNICAL MANUAL
SHIMANO FC-R9200-P POWERMETER
Read the manufacturer´s documentation of the Dura-Ace
powermeter crankset on Shimano´s website:
https://si.shimano.com/#/es/search/Keyword?na-
me=R9200-P
SRAM POWERMETERS
Read the manufacturer´s documentation of the Sram
powermeter cranksets on Sram´s website:
SRAM RED AXS POWERMETER
https://www.sram.com/en/service/models/pm-red-d1
SRAM FORCE AXS POWERMETER
https://www.sram.com/en/service/models/pm-frc-d1
SRAM RIVAL AXS POWERMETER
https://www.sram.com/en/service/models/pm-riv-d1
BLUE PAPER ORCA AERO · OMX 2022
CUTTING THE STEERER TUBE AND HEADSET
SPACERS INSTALLATION
Due to the front brake hose being internally routed
through the fork´s blade and steerer tube, removing the
fork on Orca Aero OMX requires to disconnect the front
brake caliper hose.
However, it is not necessary to disconnect the front caliper
to cut the fork´s steerer tube to the desired height.
Simply disassemble the ICR01 stem from the steerer tube
and remove the headset spacers (these can be split in two
halves to allow you to remove them without interfering
with the cabling).
With the fork completely inserted into the headtube and
the bike positioned so the fork is horizontally positioned
to avoid debris from falling into the headset, use a steerer
(depending on the steerer tube material) to cut the steerer
ponents before cutting the steerer.
When cutting the steerer tube, be careful not to damage
any components or cables.
The installation or removal of headset spacers does not
require to remove any cables. They are composed of two
halves that allow for easy installation without interfering
with the cabling.
When installing headset spacers (40mm maximum), make
sure that the steerer tube is long enough to allow for a cor-
rect and safe installation of the stem and that the cables
are long enough.
Cutting the fork steerer tube requires advan-
ced mechanical skills and must by performed
by a professional bicycle mechanic.
Never install headset spacers above the
stem. The steerer tube lenght must be set so
no spacers are needed above the stem.
When cutting carbon steerer tubes, make
sure the safety measures are met to avoid
inhaling carbon dust.
-
ORBEA | 53
EN