Technoline WS 9065 Manual Del Usuario página 21

Please note:
 If there is no valid operation within 20 seconds, the clock
automatically returns to the normal time mode.
Alarm setting
 Push the "AL" switch to the "on" position, the LCD displays
the " " icon. At the same time issued BI-BI sound (Except
for RC), the alarm function is ON. Push the "AL" switch to
the "off" position, the "
display, the alarm function is OFF.
 Press the "mode" button once and the LCD displays alarm
time. Press and hold the "mode" button for 2 seconds until
hour of the alarm time starts to flash. Press the "+" and "-"
buttons to set the hour.
 Press the "mode" button to confirm your setting, The
Minute of the Alarm time starts to flash. Press the "+" and
"-" buttons to set the minute.
 Press the "mode" button to confirm your setting, the
snooze time starts to flash. Press the "+" and "-" buttons to
set the snooze duration from 1-60 minutes.
 Press the "mode" button to confirm your setting and to
end the setting procedure.
Please note:
 If there is no valid operation within 20 seconds, the clock
automatically returns to the normal time mode.
 The alarm will sound for 2 minutes if you do not deactivate
it by pressing any button. In this case the alarm will be
repeated automatically after 24 hours.
 Rising alarm sound (crescendo, duration: 2 minutes)
changes the volume 4 times whilst the alarm signal is
heard.
" icon will disappears from the