Technoline WS 9065 Manual Del Usuario página 22

Switching off the alarm signal
 When the alarm is ringing, press any button except the
"Light/snooze" button to stop the alarm signal. It is not
necessary to reactivate the alarm. It will ring again this time
next day.
Snooze function
 When the alarm is ringing, touch the "Light/snooze"
button the alarm mode will to get to SNOOZE mode. The
alarm signal sounds again after the set snooze duration.
RF Transmission Procedure
 The weather station automatically starts receiving
transmission from outdoor thermo sensor for outdoor
temperature & humidity after batteries inserted.
 The remote sensor will automatically transmit temperature
and humidity signal to the weather station after batteries
inserted.
 If the weather station failed to receive transmission from
outdoor sensor ("- -.-"display on the LCD), press and hold
the "CH" button for 3 seconds to receive transmission
manually. RF icon flashes on the LCD，The weather
station starts to receive the remote sensor.
 If the weather station receives 2 or 3 transmitters signals,
press the "CH" button to select CH2, CH3 data or cyclic
display. The channel switch on the back of the transmitter
must be set to a number that fits the desired channel.