Operating Your Transmitter - AirPro Progress Lighting P250062 Manual De Instalación

Restore power to ceiling fan and test for proper
operation.
1. "0 , 1 , 2 , 3 , 4 , 5 , 6" buttons:
These seven buttons are used to set the fan speed
as follows:
0 = Turn the fan ON/OFF
1 = Minimum speed
2 = Low speed
3 = Medium low speed
4 = Medium speed
5 = Medium high speed
6 = High speed
2. The " " button turns the light ON or OFF
and also controls the brightness seeting. Press
and release the button to turn the light ON or OFF.
Press and hold the button to set the desired
brightness.
3. " " button: Reverse switch (control the
direction)

9. Operating Your Transmitter

Figure 17
Installing the Remote Control
Holder and Battery
Attach the remote control holder with the remote
control holder mounting screw. (Figure 18)
Install a 3V battery (included) into the remote
control. To prevent damage to the remote control,
remove the battery if not use for long periods.
(Figure 18)
x 2
Q
Figure 18