Starting The Console; Entering The Password; Language Setting; Main Menu - Keyline NINJA LASER Manual De Uso Y Mantenimiento

4.5.0

Starting the console

After checking that the emergency button has not been pressed and
that the serial cable and power cord of the console are connected to
the key-cutting machine, press the main switch.
Within a few minutes of switching on, the Console will display the
"LOGIN" page.
• Select the user for operating with the machine (e.g. USER).
• With the admin user is possible to enter the Setup Menu for
managing calibrations and settings.
• In the following page enter the password to access the

MAIN MENU.

Note: Upon switching the machine on for the first time, leave the
password field empty and press NEXT.
Copyright by Keyline - Italy
START UP
4.6.0

Entering the password

How to proceed:
• From the MAIN MENU, select: "A".
• From the SETUP MENU, select: "B".
• Select "C" and enter the interested password.
A
B
C
NINJA LASER
4.7.0

Language setting

How to proceed:
• From the MAIN MENU, select: "A".
• From the SETUP MENU, select: "B".
• Select "C" and chose the interested language.
A
B
C
Man. cod. B409927FG Keyline S.p.A. 9