EGAmaster 79760 Manual De Instrucciones página 47

2. Position the guide carriage at the pipe as shown in the figure 2.1 and 2.2 (cutting point is
at the side of the narrow wheels).
3. When using the small guide carriage (1) (see fig. 2.1), please use the small chain
tensioner (1)
(see fig. 3.1 and 3.4). When using the large guide carriage (2) (see fig. 2.1), please use the
large chain tensioner (2) (see fig. 3.1 and 3.5).
- Fit the chain tensioner into the recess provided for this purpose (see fig. 3.2 resp. fig.
3.3). Put the tensioning chain around the pipe and adjust it to the guide carriage (see fig. 3.4 -
3.6). Tighten the chain tensioner hand-tight, so that the guide carriage can still be moved. (see
fig. 3.2 respectively fig. 3.7).
47