Installation; Points To Be Paid Attention To When The Relocation Of The Refrigerator - Beko RDNE350K20W Manual Del Usuario

3

Installation

B
In case the information which are
given in the user manual are not
taken into account, manufacturer will
not assume any liability for this.
Points to be paid attention
to when the relocation of the
refrigerator
Your refrigerator should be
1.
unplugged.Before transportation of
your refrigerator, it should be emptied
and cleaned.
Before it is re-packaged,
2.
shelves, accessories, crisper, etc.
inside your refrigerator should be
fixed with adhesive tape and secured
against impacts. Package should
be bound with a thick tape or sound
ropes and the transportation rules
on the package should be strictly
observed.
Original packaging and foam
3.
materials should be kept for future
transportations or moving.
Before you start the refrigerator,
Check the following before you
start to use your refrigerator:
Attach 2 plastic wedges as
1.
illustrated below. Plastic wedges are
intended to keep the distance which
will ensure the air circulation between
your refrigerator and the wall. (The
picture is drawn up as a representation
and it is not identical with your
product.)
Clean the interior of the
2.
refrigerator as recommended in the
"Maintenance and cleaning" section.
Connect the plug of the
3.
refrigerator to the wall socket. When
the fridge door is opened, fridge
internal lamp will turn on.
When the compressor starts to
4.
operate, a sound will be heard. The
liquid and gases sealed within the
refrigeration system may also give rise
to noise, even if the compressor is not
running and this is quite normal.
Front edges of the refrigerator
5.
may feel warm. This is normal. These
areas are designed to be warm to
avoid condensation.
12
EN