Symbol Meaning; Safety Instructions; Volt Lithium-Ion Cordless Hedge Trimmer; General Power Tool Safety Warnings - Ego Power+ HT2410E Manual Del Usuario

READ ALL INSTRUCTIONS!
EN
READ OPERATOR'S MANUAL
Residual risk!
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING:
To ensure safety and reliability, all
repairs and replacements should be performed by a
qualified service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the expla-
nations with them deserve your careful attention and un-
derstanding. The symbol warnings do not, by themselves,
eliminate any danger.
The instructions and warnings they give are no substitutes
for proper accident prevention measures.
WARNING:
Be sure to read and understand all
safety instructions in this Operator's Manual, including all
safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL:
WARNING, or CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING:
The operation of any power tools can
result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power
tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We
recommend a Wide Vision Safety Mask for use over eye-
glasses or standard safety glasses with side shields.

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate.
4
56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER— HT2410E
People with electronic devices, such
Indicates DANGER,
Indicates a potential personal
Safety Alert
injury hazard.
To reduce the risk of injury,
Read Opera-
user must read operator's
tor's Manual
manual.
WARNING: Do not use in the
Do Not Expose
rain or leave outdoors while it
To Rain
is raining.
Blade Length The length of the blade
XXcm
Ø33 mm Cutting Max. Cutting capacity of the
Capacity blade
V Volt Voltage
Type or a characteristic of
Direct Current
current
... min Per Minute Revolutions per minute
-1
mm millimeter Length or size
cm Centimeter Length or size
n No Load Speed Rotational speed, at no load
0

GENERAL POWER TOOL SAFETY WARNINGS

WARNING:
Read all safety warnings and
instructions. Fail to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
WORK AREA SAFETY
◾
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
◾
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
◾
Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
Original instructions