Technoline WS6650 Manual De Instrucciones página 14

When is mostly shown with occasional
be received in this location.
When is only shown, it is very likely that the DCF time can be received in this
location.
RCC Zone offset
This clock is equipped with radio controlled time adjustment. The user will need to work
out the time zone signal they receive at their current location and make (any) adjustment
as required. This function also allows for daylight saving adjustment. Contact your local
weather bureaus or authorities for more information.
Press -/ RCC button (4) once for +1 time zone.
Press -/ RCC button (4) once again for +2 time zone.
Press -/ RCC button (4) once again for -1 time zone.
Press -/ RCC button (4) once again for same time zone.
To set time manually:
Hold down the MODE/ SET button (3) for approximately 3 seconds until the display is
flashing.
Press MODE/ SET button (3) again. Press -/ RCC button (4) or +/ C/ F button (5) to
toggle between AM / PM and 24-hour clock
Press MODE/ SET button (3) again. Press -/ RCC button (4) or +/ C/ F button (5) to
change the hour setting.
Press MODE/ SET button (3) again. Press Press -/ RCC button (4) or +/ C/ F button (5)
to change the minute setting.
Press MODE/ SET button (3) again. Press -/ RCC button (4) or +/ C/ F button (5) to
change the year setting.
Press MODE/ SET button (3) again. Press -/ RCC button (4) or +/ C/ F button (5) to
change the month/date and date/month setting.
Press MODE/ SET button (3) again. Press -/ RCC button (4) or +/ C/ F button (5) to
change the month setting.
Press MODE/ SET button (3) again. Press -/ RCC button (4) or +/ C/ F button (5) to
change the date setting.
Press MODE/ SET button (3) again. Press -/ RCC button (4) or +/ C/ F button (5) to
change the weekday language setting.
ENG for English; GE for German; IT for Italian; FR for French; NE for Dutch; ES for
Spanish; DA for Danish
Press MODE/ SET button (3) again to confirm settings. Display will no longer flash.
To see alarm time:
Press MODE/ SET button (3) once and alarm time 1 will be shown as indicated by AL.
Press MODE/ SET button (3) again and the current time will be shown.
To set alarm time:
Press MODE/ SET button (3) once and alarm time will be shown as indicated by AL.
Press and hold MODE/ SET button (3) for approximately 3 seconds until the digits flash.
Press -/ RCC button (4) or +/ C/ F button (5) to change the hour setting.
Press MODE/ SET button (3) again.
, it is very likely that the DCF time can