Playback Of Cd/Mp3/Jpeg/ Wma/Mpeg4 Discs; Card-Reader And Usb Device Operation - Aspects LW109B Manual Del Usuario

MARK
Pressing MARK button during playback will acti-
vate "BOOKMARK" dialogue box. If the box is
empty, you may press OK to set current time as
the bookmark; if there has been one, press OK
to start playback from this mark. you can delete
current bookmark with "CLR" button, or open the
tray to clear all preset bookmarks off.
Note:
1. You can set as many as 3 bookmarks for one
disc.
2. JPEG, MPEG4 discs don't support such
function.
REPEAT
When the DVD playback stops, press this but-
ton to set REPEAT mode: "Chapter/ Title/ Off";
and for VCD disc, the REPEAT options are
"Single/ All / Off"; and "Single/ All / Off" remain
for the CD, WMA, MP3, MPEG4 and JPEG discs.
Playback of CD/MP3/ JPEG /WMA/MPEG4
discs
1. Play Menu
Main Menu: Use direction button to select a
sub-menu and press OK to open a FILE. Press
Return button " ..." to get back to the menu at
the upper level..
2. Play Mode
Press STOP button and direction button " "
to move to Mode window on the right and
select a play mode when CD, MP3, JPEG,
WMA, or MPEG4 discs are played. Then press
OK button to shift among the mode options:
Repeat, Mode, Edit Mode, View Program, Add
to Program etc..
Program operation: (The following operation
can be conducted after the Edit Mode is
chosen)
1. Select and add to program playback:
Choose the items out of the Play Menu, then
press SELECT to confirm., when the target
track(s) shall be marked with a tick in the
front, then get to function list on the right to
select Add To Program before pressing SE-
LECT again. Once the tick symbol(s)
disappears, it indicates that the item(s) has
been added up to the program list.
2. Browse the Program List and Start program
playback.
Move the cursor up to View Program and
press OK to confirm, then BROWSER VIEW
shall be displayed on the left, and the Play
Menu changes into Program List showing all
the programmed items. Press OK to start
playback.
3. EDIT and EXIT
If you want to clear off some items from the
Program list, select them one by one with OK
OPERATION
button to confirm, they will be ticked auto-
matically in the front; then get back to the
Function Keys and choose Clear Program at
the bottom of the window, the ticks disap-
pear indicating the chosen items has been
cleared off from the Program List.
If you want to cancel all program items and
exit program operation, you can clear them
all off as stated above, (they can be cleared
only after STOP button has been pressed
twice) and /or open the disc tray and close it,
or cut off the power supply and reconnect it
to resume to normal playback..
Note: The number of items that can be cho-
sen to program is 10 at the most.
3. Playback control of CD, MP3, WMA,
MPEG 4 discs
During playback of WMA discs, Search, Book-
mark functions are unavailable, then you can
use numeric buttons to choose one track/
item to start playback. MPEG4 disc does not
support Bookmark function either.
Note: WMA disc does not support PRO LOGIC
function.
4. Playback control of JPEG disc
Via Play Menu you can conduct the following
operations.
Press TITLE button to browse 9 pictures each
time
Press SKIP+ button to display next picture or
next page of nine pictures.
Press SKIP- button to play last picture or pre-
vious page of nine pictures.
Press PAUSE/STEP button to pause, and
press PLAY to resume.
Press ZOOM button to zoom in a picture at
one of three levels: Off/ X1/X2/ X 3, and you
can move the picture anywhere with the di-
rection buttons..
Press Direction button to change the camera
angles of pictures: 4 angles are available:
Normal/90/180/270. Press Left button and
Right button to rotate the picture in counter-
clockwise and clockwise direction respec-
tively by 90 degrees each time; press the UP
button to rotate the picture clockwise by 180
degrees each time, and Down button coun-
terclockwise by 180 degrees each time.
II. Operation of Card Reader
USB devices
This player will enter DVD working status as
soon as it is switched on. Only when a card is
inserted, can it be switched to card reading mode
by pressing DVD/CARD button on the remote
control.
- 73 -