Nokia E72 Manual Del Usuario página 247

Wi-Fi/WLAN connection
Your device can detect and connect to wireless local area
networks (WLAN). Using a WLAN, you can connect your
device to the internet and compatible devices that have
WLAN support.
About WLAN
To use a wireless LAN (WLAN) connection, it must be
available in the location, and your device must be
connected to the WLAN. Some WLANs are protected, and
you need an access key from the service provider to
connect to them.
There might be some restrictions for Wi-Fi use in some
countries. Check with your local authorities for more
information.
Features that use WLAN, or that are allowed to run in the
background while using other features, increase the
demand on battery power and reduce the battery life.
Important: Always enable one of the available encryption
methods to increase the security of your wireless LAN
connection. Using encryption reduces the risk of
unauthorized access to your data.
WLAN connections
To use a wireless LAN (WLAN) connection, you must create
an internet access point (IAP) for WLAN. Use the access
point for applications that need to connect to the internet.
58
A WLAN connection is established when you create a data
connection using a WLAN internet access point. The active
WLAN connection ends when you end the data connection.
You can use WLAN during a voice call or when packet data
is active. You can only be connected to one WLAN access
point device at a time, but several applications can use the
same internet access point.
When the device is in the offline profile, you can still use
WLAN (if available). Remember to comply with any
applicable safety requirements when establishing and
using a WLAN connection.
Tip: To check the unique media access control (MAC)
address that identifies your device, enter *#62209526#
in the home screen.
WLAN wizard
Select Menu Ctrl. panel
>
The WLAN wizard helps you to connect to a wireless LAN
(WLAN) and manage your WLAN connections.
If the search finds WLANs, to create an internet access
point (IAP) for a connection and start the web browser
using this IAP, select the connection and
browsing.
If you select a secured WLAN, you are asked to enter the
relevant password. To connect to a hidden network, you
must enter the correct network name (service set
identifier, SSID).
Connectivity WLAN
> >
Start web
wiz..