Nokia E72 Manual Del Usuario página 254

1 Open the application where the item you want to send
is stored.
2 Scroll to an item, and select
Bluetooth.
Devices with Bluetooth wireless technology that are
within range are displayed. Device icons are as
follows:
computer
phone
audio or video device
other device
To interrupt the search, select Stop.
3 Select the device with which you want to connect.
4 If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. The same passcode must be entered in
both devices.
When the connection is established,
displayed.
Tip: When searching for devices, some devices may show
only the unique address (device address). To find the
unique address of your device, enter *#2820#.
Pair devices
To pair with compatible devices and view your paired
devices, in the main view of Bluetooth connectivity, scroll
right.
Options Send Via
> >
Sending data is
Before pairing, create your own passcode (1 to 16 digits)
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
1 To pair with a device, select
device. Devices that are within range are displayed.
2 Select the device, and enter the passcode. The same
passcode must be entered on the other device as well.
3 Some audio enhancements connect automatically to
your device after pairing. Otherwise, scroll to the
enhancement, and select
audio device.
Paired devices are indicated by
To set a device as authorized or unauthorized, scroll to the
device, and select from the following options:
Set as authorized — Connections between your device
and the authorized device can be made without your
knowledge. No separate acceptance or authorization is
needed. Use this status for your own devices, such as your
compatible headset, PC or devices that belong to someone
you trust. indicates authorized devices in the paired
devices view.
Set as unauthorized — Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete.
Options New paired
>
Options Connect to
>
in the device search.
65