1.
Heating barrel
2.
Lever
3.
Display
4.
Temperature setting button (+)
5.
Temperature setting button (-)
WARNING! The surfaces of the appliance are liable to get hot during use and
will stay hot for some time after operation. Only touch the appliance by the
handle and lever. Keep the heating barrels (including the insulation tips) well
away from your body and do not press them on your hair for too long.
NOTE: Always ensure your hair is clean and tangle-free before using the ap-
pliance.
NOTE: The appliance features an automatic switching-off function. It switches off auto-
matically after continuous operating for approx. 1 hour.
— Connect the appliance to the power supply.
— Keep pressing the on/off button for 1 - 2 seconds to switch on the appliance. The display
shows the default temperature setting 180 °C.
— The temperature of the heating barrels starts to increase instantly. The increasing tem-
perature is shown on the display.
— Press the "+" and "-" buttons to select the desired heating temperature (120 °C / 130 °C
/ 140 °C / 150 °C / 160 °C / 170 °C / 180 °C / 190 °C / 200 °C / 210 °C).
— After the heating barrels reach the set temperature, the temperature will be constantly
indicated on the display.
— Hold the appliance on the handle and press the lever to open it. Clamp a strand of hair
(approx. 5 cm in wide, not too thick) between the heating barrels for approx. 5 - 8 se-
conds. Make sure not to keep the heating barrels on your hair for too long.
— Press the lever to release the curled hair afterward.
— Repeat the same operation over the entire strand of the hair.
— Let the hair cool down before styling it further.
— When the operation is finished, keep pressing the on/off button for 1 - 2 seconds to
switch off the appliance.
— Disconnect the appliance from the power supply. Place it on a heat-resistant surface or
hang it onto a hook to let it cool down.
PRODUCT OVERVIEW
1
INSTRUCTIONS FOR USE
2
3
4
5
6
7
9
8
6.
On/off button
7.
Handle
8.
Hook
9.
Power cord with plug
9