Installation; Safety Measures; Place Of Installation; Installation Surface - Sistem-Air JOLLY Manual De Instalación, Uso Y Mantenimiento

THE UNDERMENTIONED OPERATIONS
MUST BE CARRIED OUT BY DULY QUALIFIED STAFF

4.1 Safety Measures

Suggestions for a correct installation in the relevant places are detailed hereunder:
During the installation of the unit a bipolar interrupter has to be installed before the unit
with a separation of the contacts of at least 3 mm.
Before the installation, specify the most suitable place inside the building and check
the building by carefully inspecting the following:
- There are no pipes (gas, electricity or water) spreading out in the walls.
- There are no bearing columns
- The air exhaust outlets on the external walls are not obstructed or blocked. They
can be easily drilled and their position does not create any problem to neighboring
structures.

4.2 Place of installation

Choose a space for installation so to allow the hose reaching the highest number of
spots. Consider the possibility of installing more units in a single building.

4.3 Installation surface

Leave free and well-lit space all around the suction unit to allow easy replacement of
the dust bag and trouble-free maintenance and r epair oper ations.

4.4 Installation options

Consider two different installation options:
- wall fitting with pre-installed JOLLY BOX casing (item number 8500.0).
- wall fitting without JOLLY BOX casing (finished houses).
The two following paragraphs illustrate the two different installation sequences.
For any question, do not hesitate to contact the Builder s Technical Service.
Installation, use and maintenance guide

4 - INSTALLATION

ATTENTION
-
12
-
Jolly-Jolly Contact 01-04/01