Electrical Connection - Sistem-Air JOLLY Manual De Instalación, Uso Y Mantenimiento

Installation, use and maintenance guide

4.7 Electrical connection

IMPORTANT!= Always unplug the suction unit before carrying
out any operation.
ATENTION= The installation must be carried out by duly
qualified staff only!
Before plugging the suction unit, make sure that the main power supply corresponds
to the power supply indicated on the serial number plate arranged on the rear side of
the suction unit (see the serial number plate detailed in paragraph 1.3). The relevant
data are specified also in paragraph 3.7- Technical Features .
The Builder declines all responsibility for damages to person or objects due to an electric
system connection, which does not comply with the regulations in force.
Follow the instructions to carry out this operation correctly (see picture below).
1 - Connect the power supply cables L - N to terminals 1 and 2, as shown in picture
(see below).
N
230V
~
L
2
1.5 mm
1
2
230V
~
IPX 2
20
Jolly-Jolly Contact 01-04/01