Hose Attachment Operation; Machine Maintenance; Daily Maintenance - Tennant 3280 Manual De Operador Y Lista De Repuestos

OPERATION
ATTENTION: To prevent overheating, do not
operate brush motor without vacuum motor
running.
2. Pull either one or both triggers to activate brush
motor. With motor running, push machine forward
to vacuum. Revolving brush should help assist in
propelling of machine (Figure 5).
3. Work away from power cord and receptacle to
prevent running over power cord. Use an "S"
pattern when cleaning.
4. When cleaning against walls or obstructions, use
right side of machine with protective roller wheel
for easier use and better edge cleaning.

HOSE ATTACHMENT OPERATION

1. Install hose by pushing onto connector, and add
desired cleaning attachment (Figure 6).
6
FIG. 5
FIG. 6
2. Turn on vacuum switch and pull UP on air flow
control knob. This will direct vacuum air flow to
accessory hose connector (Figure 7).
3. Return vacuum control knob to closed position
(DOWN) before resuming carpet cleaning.

MACHINE MAINTENANCE

To keep machine in good working condition, simply
follow machine's daily, weekly and quarterly
maintenance procedures.
FOR SAFETY: Before leaving or servicing
machine, turn off machine and unplug cord from
wall outlet.

DAILY MAINTENANCE

(Every 4 Hours of Operation)
1. Check filter bag for fullness, replace or empty bag
as needed. Do not reuse paper bags. Inspect cloth
bag for tears or holes, replace if damaged. Do not
wash cloth bag.
2. Check power cord for damage. Replace if
damaged.
WARNING: Do Not Operate With Damaged
Power Cord. Do Not Modify Plug. Unplug Power
Cord Before Servicing Machine.
If the supply cord is damaged or broken, it must
be replaced by the manufacturer or it's service
agent or a similarly qualified person in order to
avoid a hazard.
3. Turn brush adjustment knob to "STORAGE"
position and wrap power cord around handle.
4. Wipe off entire machine with damp cloth.
FIG. 7
Tennant 3280 (03- -04)