Proline SMART16 Manual De Instrucciones página 8

Caution:
Before you change the stitch pattern, switch off the machine and turn the hand wheel to raise the
needle all the way up so it does not get stuck and bent.
Changing the stitch pattern is not allowed when the machine is running; otherwise, the needle and/or
machine may damage.
5. Turn the hand wheel several times to make sure that there is no jamming in the stitches.
6. Slide the speed switch to the Low or High speed position and the machine will
automatically start sewing. We recommend the low speed for beginners.
7. When you finish the sewing, switch off the machine and unplug the adapter, turn the
hand wheel to raise the needle all the way up, lift the presser foot, and then gently
remove the fabric from the machine, and cut the thread with the thread cutter.
Usage tips:
Please turn the hand wheel if it is difficult to remove the fabric, and then pull out the fabric gently.
If the thread has tangled or jammed, turn the hand wheel and simultaneously pull the thread slightly to
release the thread. Bottom bobbin mechanism is a more precise part, inappropriate actions may damage
it. Please do not push or pull it by finger or any tool.
FEATURES
1. Selection of stitch pattern
Rotate the pattern selection dial to select the desired stitch pattern.
Caution:
Before you change the stitch pattern, turn off the appliance and turn the hand wheel to raise the needle
all the way up so it does not get stuck and bent.
Changing the stitch pattern is not allowed when the machine is running; otherwise the needle and/or
machine may damage.
2. Reverse sewing
Reverse sewing (back stitching) is useful for reinforcing the beginning and end of
seams. To use this function proceed as follows:
a. Sew forwards as normal, and then press and hold down the reverse stitch
button on the front of the machine to sew backwards.
b. To sew forwards again, release the reverse stitch button.
c. Reverse sewing distance is 1.5 ~ 4.5mm, and control the reverse stitch button trip to control the
sewing distance. When the button is pressed to the end, you will get the maximum sewing distance.
3. Setting the sewing speed
Slide the speed switch to the low (Ⅰ) or high (Ⅱ) position.
4. Working lamp
If additional light is needed, press the light button to turn on the light. Press the
button again to turn it off.
5. Thread cutter
The machine has a thread cutter on the central left side of the machine. It can be used
to cut off the thread after sewing or winding thread.
EN - 6