In The Event Of Problems - Rowenta PU2120Z0 Manual De Instrucciones

EN
STORAGE
When you are not using the appliance, store it in a dry place.

IN THE EVENT OF PROBLEMS

• Never dismantle your appliance yourself. A poorly repaired appliance can cause risks for the user.
• Check the troubleshooting table below before contacting an approved Service Centre:
Problem
The appliance
does not emit
air.
The air flow does
not change.
The flow is a lot
weaker than be-
fore.
There is an un-
pleasant smell
coming from the
air outlet.
The air quality
light does not
change colour.
LET'S HELP PROTECT THE ENVIRONMENT!

Your appliance contains valuable materials which can be recovered or recycled.

Leave it at a local civic waste collection point or take to an approved service centre.
Check
• Is the power cord connected?
• Are all the display elements off?
• Is there an electricity outage?
• Is the front hood closed?
• Is the appliance in Manual mode? Select the correct operating mode.
• Does the filter need cleaning or re-
placed?
• Does the filter need cleaning or re-
placing?
• Is the sensor glass covered in
dust?
• Does the light still indicate poor air
quality?
• Does the light still indicate good
air quality?
Connect the power cord to a plug with the
correct voltage.
Press the start button and select the requi-
red function.
You can use your purifier once the power
comes on again.
Close the front hood properly.
Check the filter cleaning and replacement
frequencies and clean/replace the filter(s) if
necessary.
Check the filter cleaning and replacement
frequencies and clean/replace the filter(s) if
necessary.
Clean the sensor glass.
Set the sensor sensitivity to "low sensiti-
vity" or medium.
Set the sensor sensitivity to "sensitive" or
"medium".
18
Solution