Labelling; Connections - GOK HS-V.2 Serie Instrucciones Para El Montaje Y El Funcionamiento

LABELLING

Type HS-V.2
HQ
PS 10bar
HA = ... m
TA = -25 - +40°C
Z-65.50-492
batch number
e.g. 2021

CONNECTIONS

Universal connection set (UA):
More information about Universal connection fitting type UA can be
found at www.gok.de/montagehinweise.
20 / 60
Type designation
Flood-proof construction
element
Max. permitted pressure 10 bar
Set safety height (adjustable)
Ambient temperature
General technical approval
manufacturer specification
year of manufacture
Compliance mark with the no. of
the technical approval
Arrow for flow direction
The female thread can also take the GOK universal
connection set type UA, which corresponds to a
compression joint type G acc. to EN 12514 Annex L.
Piping used:
Copper pipe with outer diameter 6, 8 or 10 mm, e.g.
acc. to EN 1057.
The housing is made from a zinc die-cast alloy:
Do not use a conical pipe thread acc. to EN 10226-1.
A reinforcement ring must be used with all thin-walled
pipes and with soft pipe materials.
Brass reinforcement rings may not come into contact
with aluminium pipe. Risk of corrosion!
according to EN 12514
EN 12514
0.5 m - 4m
see name plate
Certificate of suitability for intended
use issued by building inspectorate
permanent on casing
Female thread G 3/8
Female thread G 3/8 acc. to EN ISO 228-1, as
screw-in opening G 3/8-UA-O acc. to
EN 12514 Figure L.1.
O-ring dimensions 14x2 mm, included with delivery
Screw-in connectors, type B acc. to EN ISO 1179-4
or EN 12514 Annex K (adequate with type A acc.
to DIN 3852-2). The recommended maximum
torque with steel screw-in connector is 15 Nm.
Artikel-Nr. 15 513 50 c