Electrical Wiring Diagram - Cedar Ridge MTF4TPU Manual Del Usuario

ELECTRICAL WIRING DIAGRAM

Any electrical re-wiring of this appliance must
be done by a qualified electrician. This wiring
must be done in accordance with local codes
and/or in Canada with the current CSA C22.1
Canadian Electrical Code, and for US instal-
lations, the National Electrical Code ANSI/
NFPA NO 70.
WARNING: If repairing or
replacing any electrical compo-
nent or wiring, the original wire
routing, color coding and secur-
ing locations must be followed.
1. Power Supply Cord
2. Electrical Wire Connector
3. Rocker Switch 1
4. Rocker Switch 2
5. Motor/Heater
6. Temperature Limiter
7. Resistor
8. Heat Pilot Light
1
AC120V
60Hz
BLACK
WHITE
22
All manuals and user guides at all-guides.com
Verify proper operation after servicing. If any
of the original wire as supplied with the appli-
ance must be replaced, it must be replaced
with a wire of at least a 105º C temperature
rating.
BLACK BLACK
BROWN ORANGE
RED
3 4
2
Motor
YELLOW
WHITE
WHITE
2
WHITE
Figure 27 - Wiring Diagram
www.usaprocom.com
CAUTION: Label all wires
prior to disconnection when
servicing controls. Wiring errors
can cause improper and danger-
ous operation.
BLACK
2
7
5
AC120V
60Hz
6
8
tº
Motor
200032-01A