Using the pressure equipment
You can operate the pressure equipment in the carrier bag directly
on your body. That facilitates efficient and effective operation of
pressure equipment independent of a stationary source of
compressed air.
Operation with the controller mount
To transport the pressure equipment over long distances, proceed as
follows:
Place the transport case in a horizontal position with the lid facing
upwards. Open the transport case and the latch for the lid.
Take out the belly band with the controller mount and adjust the
belly band so that it fits well.
Remove the pressure equipment and the compressed air
cartridge.
Connect the compressed air supply to the pressure equipment as
described on page 16.
Push the controller's connection bolt (21) onto the quick coupler
of the controller mount (19) until it engages audibly.
Using the pressure equipment
19