After Use; Disconnect The Compressed Air Supply - Prebena DRUCKLUFT MOBILO Manual Del Usuario

After use

After use or prior to prolonged shut-downs, perform the steps
described below.

Disconnect the compressed air supply

Remove compressed air cartridge
Unscrew the compressed air cartridge from the thread of the
fitting (8.).
The compressed air contained in the pressure equipment escapes
audibly.
Screw the stoppers into the fitting thread.
Screw the seal cap onto the compressed-air cartridge.
Store the compressed air cartridge protected against impacts and
dropping in the supplied transport case.
You can refill the compressed air cartridge using the PKT-
FILLMASTER 350 compressor, which is available as an
accessory. You can also purchase a full compressed air
cartridge in exchange for an empty cartridge from your dealer.
Disconnect compressed air hose
Press the quick coupler of the tapping point (3.) towards the
pressure equipment.
The quick coupler is now released.
Pull the compressed air hose off the tapping point (3.) on the
pressure equipment.
After use
23