Obligations Of The Operating Company; Obligations Of The Trainees; Symbols Used In This Manual - Festo TP 1410 Manual Del Usuario

1.4 Obligations of the operating company

The operating company undertakes to:
•
Allow only those persons to work with the system who are familiar with basic regulations regarding
work safety and accident prevention and have been instructed in the use of the system, and have
acknowledged by signature the fact that they have read and understood the chapter concerning safety
and the warnings in these operating instructions
•
Arrange for testing of personnel at regular intervals for safety-conscious work habits
• Only allow trainees to work with the system under the supervision of a trainer

1.5 Obligations of the trainees

All persons who have been entrusted to work with the system undertake to:
•
Read the section concerning safety and the safety precautions in this manual before beginning work
•
Adhere to basic regulations regarding work safety and accident prevention during work

1.6 Symbols used in this manual

Warning
Ignoring this note may result in property damage and personal injury.
Life endangering high-voltage!
This safety precaution makes reference to the possibility of life endangering
electrical voltage.
Caution
Ignoring this note may result in substantial property damage.
Waning
Ignoring this note may result in danger of burning
(hot surface, temperature up to 85 °C).
© Festo Didactic GmbH & Co. KG 757309
1 General information on the servo brake and drive system, and the manual
25