Selecting An Operating Mode, Adjusting Speed And Torque, Starting A Measurement - Festo TP 1410 Manual Del Usuario

5.4 Selecting an operating mode, adjusting speed and torque, starting a measurement

Selection and adjustment
The rotary knob (see item 9 in section "Layout") is used for selection and adjustment.
•
Turn the knob  the arrow is moved up or down one line.
•
Press the knob  your selection is acknowledged. As a result, either the next display appears or a
numeric value can be selected with the rotary knob.
Note
The numeric value for torque/speed can be quickly reset to zero by pressing the rotary knob twice
is quick succession.
1
> Torque Con
Speed Con
PC
Torque Con
> Speed Con
PC
Torque Con
Speed Con
PC
Overview of displays which appear at the test bench
© Festo Didactic GmbH & Co. KG 757309
2
Torque:
> 0.8 Nm
Speed:
0 000 rpm
Exit
Speed:
> 0 000 rpm
Torque:
0.0 Nm
Exit
3
PC Mode
Controller
Inactive
5 Operating the test bench
4
PC Mode
Controller
> Active
35