Workplace Safety - Cross Tools CPG 6000 DEV Manual De Instrucciones

Original User manual
Figure
4.2.

Workplace safety

1. Keep your work area clean and well-lit.Messy or dark work areas can lead to accidents.
2. Do not operate the motorised device is an explosive environment, in which combustible liquids, gases or
dusts are present. Motorised devices generate sparks, which can ignite the dust or fumes.
3. Keep children or other people away when using the device.If you get distracted, you can lose control over
the device.
4.3. Safety of persons
1. Be attentive. Pay attention to what you are doing and use common sense when working with a motorised de-
vice.
2. Do not use a motorised device if you are tired or under the influence of drugs, alcohol or medication. A mo-
ment of inattention when using the motorised device can cause serious injuries.
3. Avoid unintentional start-up. Make sure that, the motorised device is switched off before you lift it or
carry it.
4. Clear away the adjustment tools or wrenches before you switch the motorised device on.If a tool or a
wrench is left in a rotating part of the device, it can cause injuries.
5. Wear suitable clothes.Do not wear loose clothes or jewellery. Keep hair, clothes and gloves away from mov-
ing parts.Loose clothes, jewellery or long hair can get caught in moving parts.
4.4. Safety when using combustion engines
1. NEVER operate the machine indoors or in closed areas unless the exhaust gases are removed. Carbon mon-
oxide in the exhaust gases is poisonous and can cause unconsciousness and death.
2. Do not smoke or work in the immediate vicinity of the machine.
3. Check the fuel lines and the tank for leaks and cracks at regular intervals.
4. Do not refuel when the machine is switched on or still hot.
5. Do not refuel near sparks, open fire or a smoking person -
Risk of explosion!
6. Never refuel a petrol or diesel engine in a room without sufficient ventilation. Fuel vapours are highly inflam-
mable and poisonous.
7. Do not overfill the tank and avoid spilling fuel when refuelling. If fuel spills, make sure that everything is dry be-
fore you start the engine.
8. Make sure that the tank cap has been correctly and firmly closed after refuelling.
9. Store the fuel in permitted containers only.
10. A few parts of the combustion engine become very hot and can cause burns. Always be careful and observe
the warning stickers on the device.
Explanation
Please observe the indication sticker.
Please observe the indication sticker.
Do not operate the device near an open fire.
5
21