Motorola Solutions MTP6000 Guia De Instalacion página 10

8. RSM bracket allows user to clip on the RSM as shown in
Figure 2 below.
Figure 2: Clipping the RSM on the Bracket
9. Secure the Cradle to Junction Box Cable (PMKN4169) or
Cradle to Junction Box Cable with USB Data Cable
(PMKN4170) onto the bottom of the cradle pocket by
screwing the jack screw onto the insert nut as shown in
Figure 3 below.
Figure 3: Installing the Cradle to Junction Box Cable onto
Antenna Kit Installation
Note: This section does not apply to the Vehicular Cradle
PMLN6399.
Use only a Motorola approved roof antenna and refer to the
antenna installation instruction provided in the antenna kit.
8
the Cradle