1. Antenna
2. 5 m RG58 FME to unterminated loose FME cable,
supplied in kit
3. 5 m FME to FME RG58 RF cable
4. Duplexer
5. 2.4 m DC Adapter Cable (FTN6790)
6. 1 m FME cable
1
4
Figure 4: Combined GPS/TETRA Typical Antenna Kit
Cabling
To avoid visual or physical obstruction, route the cables down
inside the door moulding and beneath the carpets and
seat(s). Allow sufficient slack at the connector ends of the
cables to reach the duplexer or cradle connectors.
See Figure 5 before routing or connecting the cables.
1. Connect the 5 m MFME RG174 cable to the antenna
GPS connection.
2. Connect the 5 m FME RG58 cable to the antenna TETRA
connection.
3. Connect the 5 m FME RG174 cable to the duplexer
"GPS" input.
10
2
5
3
6