Kit Assembly - Metra 99-8237S Instrucciones De Instalación

ISO DIN head unit provisions
1. Mount the pocket to the radio
brackets with the (4) #8 x 3/8"
Phillips screws supplied. (Figure A)
2. Slide the aftermarket radio into the
radio brackets and secure with the
screws supplied with the radio.
(Figure B)

Kit Assembly

(Figure A)
(Figure B)
99-8237S
3. Snap the 8237S trim plate into the
backside of the factory radio panel.
(Figure C))
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS.
Re-connect the negative battery
terminal and test the unit for
proper operation.
5. Reassemble dash in reverse order
of disassembly.
3
(Figure C)