Dash Disassembly - Metra 95-7883HG Instrucciones De Instalación

1. Remove (1) Phillips screw from the
trim panel below the a/c control
that houses the accessory socket
and factory USB's then unclip and
remove the panel. (Figure A)
2. Remove (1) 8mm bolt facing up in
cavity behind a/c control.
(Figure B)
3. Unclip and remove the instrument
cluster trim panel. (Figure C)
(Figure A)
95-7883HG

Dash Disassembly

(Figure B)
(Figure C)
4. Unclip and remove the a/c vent
trim panel including the vents
above the factory radio. (Figure D)
5. Remove (2) 8mm bolts securing
the factory radio then unclip and
remove the radio. (Figure E)
6. Remove (2) screws securing the
air bag light.
7. Remove (2) screws securing the
hazard switch.
Continue to kit assembly
2
(Figure D)
(Figure E)