Publicidad
Idiomas disponibles
Idiomas disponibles
22. Install knee bolster screws (2).
Tighten 2 N·m (18 lb in)
23. Install left side instrument panel outer trim cover (1).
24. Install park brake release handle to knee bolster (3). Figure
9
FIGURE 9
25. Install park brake release handle bolt (1).
Tighten 9 N·m (80 lb in)
26. Remove the underhood electrical center/junction block
cover.
27. Release the retainers securing the junction block to the
bracket and remove from vehicle (1). Figure 10
FIGURE 10
Fog Lamp Kit
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
REVISION
AUTH
28. Remove block connector X1 from underhood junction block
bracket. Figure 11
FIGURE 11 (BOTTOM VIEW)
29. Remove TPA from block connector X1.
30. Install lone terminal, circuit 2234, from fog lamp harness into
cavity B5 on block connector X1. Figure 12
FIGURE 12 (END VIEW)
31. Install TPA to block connector X1.
32. Install block connector X1 into underhood junction block
bracket. Exit the fog lamp wiring out the front of the
underhood junction block bracket and attach to fog lamp
harness.
PART NO.
IR 31JL07
INSTALLATION INSTRUCTIONS
DR
TITLE
PART NO.
19170448
6200 Grand Pointe Dr., Grand Blanc, MI 48439
19170448
SHEET
Fog Lamp Kit
3
SHEET
3
15
OF
15
OF
Publicidad
